Mevotech Supreme Suspension Control Arm and Ball Joint Assembly P/N:CMS861190
Mevotech Supreme CMS761226 front right lower control arm with ball joint for the 2016-2023 Mazda CX-9 links the wheel to the chassis. This Mevotech Supreme control arm, also called a control arm and ball joint assembly, comes with its ball joint, bushings and dust boot.
Worn bushings or a worn ball joint can show up as a clunk over bumps, loose or wandering steering, or uneven tire wear. These signs alone do not prove this arm is the problem, since a worn sway bar link can make a similar clunk. This listing is one arm for the front right; the front left is a separate part, and both are normally replaced together. The front axle takes one lower arm on each side.
It is a direct-fit replacement control arm for the 2016-2023 Mazda CX-9.
Fit and size
Build and materials
One control arm with ball joint, bushings and dust boot.
Interchange: 527-410
CB65314 · CA14862 · 5CB76221 · TC3M34300 · TC3M34300A · TK4834300A · TK4834300B · TK4834300C · TM5234300A · TM5234300B · GS761226 · 2609007
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the lower control arm for the 2016-2023 Mazda CX-9 front right side?
Yes. Mevotech Supreme CMS761226 is the front right lower control arm with ball joint for the 2016-2023 Mazda CX-9. The front left is a separate part.
Does the Mevotech Supreme CMS761226 come with the ball joint and bushings?
Yes. Mevotech Supreme CMS761226 includes the ball joint, rubber bushings and a rubber dust boot, so you do not buy them separately.
What material is this Mevotech Supreme lower control arm made of?
The control arm is steel, with rubber bushings and a rubber dust boot. The ball joint has a grooved stud and is pre-greased.
How can I tell if a Mevotech Supreme suspension control arm is worn?
A clunk over bumps, loose steering or uneven tire wear can be signs of wear. A shop can inspect the ball joint and bushings to confirm.
Is the ball joint on this control arm pre-greased?
Yes. The ball joint arrives pre-greased and is a press-in type with a rubber dust boot already included.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.