Mevotech Supreme MS95004 front drag link for the 1971-1980 International Scout II carries steering input from the steering gear to the steering linkage. Also called a steering drag link, it is a direct-fit replacement for this vehicle.
- SAE grease fitting included for servicing
- Protective surface treatment resists rust build-up
- Steel construction with a dust boot and castle nut included
- Pre-greased and greaseable
- Mevotech Supreme line, with 9/16 - 18 thread and two mount studs
Quick facts
- Part: Mevotech Supreme MS95004 drag link
- Also called: steering drag link
- Fits: 1971-1980 International Scout II
- Position: Front
- Material: Steel
- Condition: New
Loose or vague steering, wandering, a clunk when turning or a torn dust boot can mean a drag link is worn. Before you replace it, rule out other worn steering parts such as the tie rod ends, pitman arm and steering box, since play in any of them can feel much the same.
Fits
This drag link fits the 1971-1980 International Scout II.
Specifications
Fit and size
- Position: Front
- Length: 41.26 in
- Thread size: 9/16 - 18
- Mount studs: 2
- Quantity per vehicle: 1
Build and materials
- Material: Steel
- Adjustable: No
- Greaseable: Yes
- Condition: New
- Country of origin: China
In the box
This listing holds one drag link with its mounting hardware, castle nut, dust boot and SAE grease fitting; the 1971-1980 International Scout II takes one.
Interchange: 626.70301
19474042 · DS834 · IDS834 · 418469C93 · 418469C94 · 25883
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
19474042, 626.70301, DS834, IDS834, 418469C93, 418469C94, MS95004, 25883
Frequently Asked Questions
Is the Mevotech Supreme MS95004 drag link right for the 1971-1980 International Scout II?
Yes. The Mevotech Supreme MS95004 is a front drag link that fits the 1971-1980 International Scout II, which takes one.
Does this drag link come with a castle nut and dust boot?
Yes. The listing includes the castle nut, dust boot, mounting hardware and SAE grease fitting, with one drag link per listing.
What thread size and length does the Mevotech Supreme MS95004 have?
The thread size is 9/16 - 18 and the length is 41.26 in. The link has two mount studs and is not adjustable.
Can a torn dust boot mean a drag link needs replacing?
It can. A torn boot lets grease out, and loose steering or a clunk when turning can also point to wear, so have it inspected promptly.
Is the MS95004 drag link pre-greased and greaseable?
Yes. The Mevotech Supreme MS95004 comes pre-greased and has an SAE grease fitting included for later servicing.
