Mevotech Supreme Suspension Ball Joint P/N:MS10558
Built for high-usage vehicles and working trucks, the Mevotech Supreme MK8435 front lower ball joint is a direct-fit ball joint replacement for the 1980-1997 Ford F-250, the 1997 Ford F-250 HD and the 1980-1986 Ford F-350. A ball joint is the pivot between the steering knuckle and the control arm. It lets the wheel steer and move up and down with the suspension.
Mevotech engineers its Supreme parts in-house, with application-specific upgrades aimed at durability and performance. They are intended for high-usage commercial and passenger vehicles, SUVs, fleets and working trucks. Mevotech's Labor Saver™ designs, tools and hardware are meant to make installation quicker and easier. Mevotech also puts its Supreme ball joints through extensive in-house and third-party durability testing.
Specifications: Ball joint assembly with press-in mounting and a threaded stud. It is not adjustable. Country of origin: China.
The listed applications use a quantity of two.
Signs a ball joint may need replacing include clunking over bumps, loose or wandering steering, uneven tire wear and noticeable play at the joint. Other front-end parts can cause similar symptoms, so diagnose the cause before replacing.
See the Buyer's Guide tab for every listed vehicle.
Interchange: 610.65055 · DW-K8435
61065055 · DWK8435 · 19289424 · TC1663 · B8435 · B8435PR · FA1623 · K8435 · E0TZ3050B · IK8435 · 30014130 · 10517 · X15BJ0117 · JBJ7010 · TK8435 · XK8435
This part cross-references / interchanges with the following part numbers:
Which trucks does this 1980-1997 Ford F-250 ball joint fit?
It is listed for the 1980-1997 Ford F-250, the 1997 Ford F-250 HD and the 1980-1986 Ford F-350, all engines. Check the Buyer's Guide tab for your exact application.
Where does this suspension ball joint install?
It is cataloged as a front lower ball joint. It uses press-in mounting with a threaded stud.
How many ball joints do I need?
The listed applications use a quantity of two, so order two for these trucks.
Does it come with installation hardware?
Yes. Mounting hardware is included, along with a part-specific nylon locking nut, a 180-degree SAE grease fitting and a pre-installed dust boot.
Can this ball joint be greased?
Yes. It comes pre-greased and is greaseable through the included 180-degree SAE grease fitting, so it can be serviced during routine maintenance.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.