Mevotech Supreme Suspension Control Arm P/N:CMS101680
Mevotech Supreme CMS101503 front left lower control arm for the 2009-2015 Jaguar XF and other vehicles locates the wheel and lets it move up and down with the suspension. This Mevotech Supreme control arm is made of aluminum and includes rubber bushings.
A clunk over bumps, uneven tire wear or vague steering can mean a worn control arm or its bushings. These signs alone do not prove the arm is at fault, since a worn sway bar link can feel much the same. Both front lower arms are normally replaced together; this listing is a single arm for the front left, and the front right is ordered separately.
Built to meet or exceed OE specifications, this arm is listed for a wide range of Jaguar models, including the 2009-2015 Jaguar XF, the 2010-2015 Jaguar XFR and the 2013-2015 Jaguar XFR-S. These cars take one arm on the front left. If your Jaguar is not named here, look up its model and year in the "Vehicles it fits" section.
Fit and size
Build and materials
One control arm with its rubber bushings and additional hardware.
Interchange: 526-599
19390066 · TC7774 · CA24023 · CA24023PR · 6CB10751 · C2C18351 · C2C36867 · C2P1052 · C2P14506 · C2P19955 · C2P24862 · RK643977 · GS101503 · 2608593 · 30036605 · X21CA0178
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this a control arm for the 2009-2015 Jaguar XF?
Yes. Mevotech Supreme CMS101503 is a front left lower control arm listed for the 2009-2015 Jaguar XF. For other models, look in the "Vehicles it fits" section.
Is this the lower control arm for the 2009-2015 Jaguar XF front right side?
No. This arm is for the front left lower position. The front right arm is a separate part and is ordered on its own.
Does this Mevotech Supreme suspension control arm come with bushings?
Yes. Mevotech Supreme CMS101503 includes rubber bushings, and additional hardware comes in the box.
What is the Mevotech Supreme lower control arm made of?
The arm itself is aluminum, with rubber bushings. An additional surface treatment prevents rust build-up for longer ball joint life.
Can worn rubber bushings on a control arm cause a clunk over bumps?
They can. Cracked or torn rubber, a clunk over bumps or uneven tire wear can mean a worn arm. A shop can inspect it safely; have it checked promptly.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.