Mevotech Supreme Suspension Control Arm P/N:CMS101364
Mevotech Supreme CMS401103 rear left lower control arm for the 2009-2012 Ford Fusion and other vehicles connects the rear wheel assembly to the body and locates the wheel as the suspension moves. Stamped steel construction meets or exceeds OE specifications.
When a suspension control arm wears, the rear can clunk over bumps, feel loose in corners or wear tires unevenly, and those signs can also come from other suspension parts. Before you replace it, look over the rubber bushings for cracks or tearing and the arm for bends or rust, with the car parked and the engine off. Both rear lower arms are normally replaced together, but this listing is one arm, for the rear left only; the right side is ordered separately.
It is a lower control arm for the 2009-2012 Ford Fusion, the 2009-2012 Lincoln MKZ and the 2009-2011 Mercury Milan.
Fit and size
Build and materials
One control arm with its rubber bushings.
Interchange: 526-003
19327339 · PGS401103 · TC7383 · CA85613PR · 9E5Z5A649B · 9E5Z5A649D · RK643072 · C6GS401103 · GS401103 · 2607392 · 1301104 · 30034373 · 8CB40214 · CP5114
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this 2009-2012 Ford Fusion control arm for the left or right side?
Mevotech Supreme CMS401103 is the rear left lower control arm. The rear right side takes its own control arm, and this listing is one arm.
Will this lower control arm fit a 2012 Ford Fusion?
Yes. CMS401103 is the rear left lower control arm for the 2009-2012 Ford Fusion, and it also fits the 2009-2012 Lincoln MKZ and the 2009-2011 Mercury Milan.
What is the Mevotech Supreme control arm made of?
Mevotech Supreme CMS401103 is stamped steel with rubber bushings. It has a protective surface treatment to prevent rust build-up.
Does this rear left control arm come with its bushings?
Yes. The arm comes with its rubber bushings, and it is not an adjustable design.
How do I tell if a rear lower control arm is wearing out?
Worn bushings or a bent arm can show up as a clunk over bumps, loose handling or uneven tire wear. A shop can inspect the arm from underneath to confirm.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.