Mevotech Supreme Suspension Control Arm P/N:CMS901235
Mevotech Supreme CMS90120 front left lower control arm for the 2001-2005 Hyundai Sonata and other vehicles connects the front left wheel to the chassis. This Mevotech Supreme control arm meets or exceeds OE specifications and is built for high-usage commercial and passenger vehicles, SUVs, fleets and working trucks.
A clunk over bumps, a car that wanders or pulls, or uneven front tire wear can mean a worn arm or worn bushings. Other suspension parts can make similar noises, so find the cause first. With the engine off, look at the visible rubber for cracks or splits and at the arm for bends or rust.
It works as a lower control arm for the 2001-2005 Hyundai Sonata, and the vehicles it fits also include the 2001-2006 Kia Optima and the 2001-2006 Kia Magentis. Only one goes on the front left side of the axle; the front right is a separate part, and the two are normally replaced together. For another make or engine, open the "Vehicles it fits" section and check your exact model and engine.
Fit and size
Build and materials
One control arm with its rubber bushings and mounting hardware.
Interchange: 101-6104 · 102-6104 · 520-855
19291314 · QGS90120 · TC2383 · CA60173 · CA60173PR · CA14258 · 5450038011 · 5450038611 · 5450038620 · 5CB90040 · CAK641111 · RK641111 · C6GS90120 · GS90120 · 2606136 · 102109 · 30030235 · 5071685 · SRK640408
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Can I use Mevotech Supreme CMS90120 as a Hyundai Sonata control arm on a 2001-2005 Hyundai Sonata?
Yes. Mevotech Supreme CMS90120 fits the 2001-2005 Hyundai Sonata as the front left lower arm. The right side is a separate part.
Is CMS90120 the right Kia Optima control arm for a 2001-2006 Kia Optima?
Yes. Mevotech Supreme CMS90120 fits the 2001-2006 Kia Optima in the front left lower position, and it also fits the 2001-2006 Kia Magentis.
Do the bushings and mounting hardware come with this Mevotech Supreme control arm?
Yes. The listing includes rubber bushings and mounting hardware along with the front left lower control arm.
What is this front left lower control arm made of?
The arm is stamped steel with a protective surface treatment, and its bushings are rubber. It is 17.5 inches long and is not adjustable.
How can I tell if a suspension control arm on the front left is worn?
A clunk over bumps, a pull to one side or uneven front tire wear can mean the arm or its bushings are worn. A shop can measure bushing play and check the arm for bends.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.