Monroe Shocks & Struts Air Shock Absorber P/N:MA819
Monroe Shocks & Struts MA830 rear shock absorber for the 2000-2020 Chevrolet Tahoe and other vehicles has an adjustable air chamber that helps keep the rear level under load. It is intended for hauling extra weight.
A worn rear shock can show up as a bouncy or floating rear end, fluid on the shock body, or a rear that sits low under load. Tired springs, worn tires or a leaking air line can be behind those signs too, so find the cause before you buy.
The 2000-2020 GMC Yukon and the 2015-2020 GMC Yukon XL are listed too, along with a wide range of other Chevrolet, GMC and Cadillac models. If your truck is not named here, look up its year and model in the "Vehicles it fits" section.
Fit and size
Build and materials
A pack of 2 rear air shock absorbers, one for each side, with the dust shield and boot included.
Interchange: 13-510900 · 13-511200 · 14-510900 · 14-511200
5801091 · 19300074 · 25979396 · 22811847 · 25979393
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Monroe MA830 air shock fit the 2000-2020 GMC Yukon?
Yes, Monroe Shocks & Struts MA830 fits the rear of the 2000-2020 GMC Yukon and the 2015-2020 GMC Yukon XL. Other models are in the "Vehicles it fits" section.
How much air pressure can the MA830 air chamber take?
Monroe Shocks & Struts MA830 takes up to 150 PSI. Inflating or deflating the chamber helps keep the rear level with up to 1,200 lbs of added weight, within your suspension, tire and transmission limits.
Do I need an air compressor to adjust these Max-Air shocks?
No, not always. The air fitting can tie into the factory air system where applicable, or you can inflate it manually with an air compressor; this varies by application.
What can a worn rear air shock feel like?
Signs can include a bouncy or floating rear end, fluid leaking from the shock body and the rear sitting low under load. A shop can test the shock and the air system.
What are the compressed and extended lengths of the MA830?
Compressed length is 14.625 in (371.5 mm) and extended length is 23.9375 in (608 mm), with 9.313 in of travel. Both ends are loop bushing and sleeve mounts.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.