Monroe Shocks & Struts Suspension Shock Absorber P/N:5784
Monroe Shocks & Struts 65128 front shock absorber for the 2008-2019 Kenworth T170 and other vehicles is a nitrogen gas-charged, large-bore shock for air spring and taper leaf suspensions on class 6-8 trucks and buses.
Oil on the shock body, a dented body, cracked bushings or excess vibration can mean a shock is worn. Before you buy, look the bushings and mounts over with the engine off, because other worn suspension parts can show similar symptoms; a shop can test anything beyond that. The truck takes two, one on each side of the front axle, so order two and fit them together.
This front shock absorber is a direct-fit replacement for the 2008-2010 Kenworth T270 and the 2008-2010 Kenworth T370 as well. If your Kenworth is not named here, enter its year and model in the "Vehicles it fits" section to see whether it is covered.
Fit and size
Build and materials
One shock absorber with its dust shield. Mounting hardware is not included, so plan on new hardware.
Interchange: HD12150023 · 44185031 · F347310 · 665617 · 85031 · 8160115 · 1TX665617 · B711000 · 650128 · 410044
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Will the Monroe 65128 front shock fit a 2008-2010 Kenworth T270?
Yes. Monroe Shocks & Struts 65128 is a front shock for the 2008-2010 Kenworth T270, and it also fits the 2008-2010 Kenworth T370 and the 2008-2019 Kenworth T170.
Does the Monroe 65128 shock come with mounting hardware?
No. The Monroe 65128 comes with its metal dust shield, but mounting hardware is not included, so plan on new hardware.
What are the bore size and lengths of this Magnum shock?
This front shock has a 1.75 in (44.5 mm) bore and an 18 mm shaft. It measures 16.125 in compressed and 25.5 in extended, center of loop to center of loop.
How can I tell if a Magnum front shock is worn out?
Oil on the shock body, a dented body, cracked bushings or excess vibration can point to a worn shock. A shop can confirm it.
Is this Monroe shock gas-charged, and what mounts does it use?
Yes. It has a nitrogen gas charge, a loop bushing and sleeve mount at the upper end and a loop (eyelet) bushing mount at the lower end.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.