Monroe Shocks & Struts Suspension Shock Absorber P/N:37342
Monroe Shocks & Struts 911196 rear shock absorber for the 1999-2004 Ford F-250 Super Duty and other vehicles controls spring movement in the rear suspension. It belongs to the OESpectrum light truck line, designed to restore the original factory drivability and handling precision.
A worn rear shock can show up as a bouncy ride, extra body roll or fluid leaking down the body. These signs alone do not prove the shock is the problem, since tired springs or worn bushings can ride rough too. This listing is one shock, and both rear sides are normally replaced together.
This shock fits the 1999-2004 Ford F-250 Super Duty and the 1999-2004 Ford F-350 Super Duty.
Fit and size
Build and materials
One shock absorber with its metal dust shield. This listing holds one shock, and the vehicle takes two. Mounting hardware is not included, so plan on new hardware, as the old pieces may not be reusable.
Interchange: 52563 · TS3331452B · 342509 · 342510 · 342511 · 2C3Z18125BA · 77810 · G63461 · G63810 · 344413 · 565091 · KG54333 · FD110 · 210440 · 32359 · 34687 · NS911196 · RS55273 · 12140211
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Monroe 911196 shock fit the 1999-2004 Ford F-350 Super Duty?
Yes. Monroe Shocks & Struts 911196 is a rear shock absorber for the 1999-2004 Ford F-350 Super Duty and the 1999-2004 Ford F-250 Super Duty.
Do these Monroe OESpectrum rear shocks come with mounting hardware?
No. Monroe Shocks & Struts 911196 is sold as one shock absorber with a metal dust shield. Mounting hardware is not included.
How long is this rear shock compressed and extended?
This rear shock measures 18.25 in (463.5 mm) compressed and 31 in (787.4 mm) extended, which gives 12.75 in of travel.
Is this OESpectrum rear shock gas charged?
Yes. This rear shock has a nitrogen gas charge, which helps keep the tire in contact with the road by reducing aeration and shock fade.
What kind of mounts does this rear shock have?
The upper end is a loop bushing mount, 5/8 bushing ID X 1.5/16 bushing OAL. The lower end is a loop bushing and sleeve mount, 12MM sleeve ID X 1.1/2 sleeve OAL.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.