Monroe Shocks & Struts 911517 rear shock absorber for the 1992-2005 Chevrolet Blazer and other vehicles damps the rear suspension's up-and-down movement. It is built to restore handling precision and control while filtering out impact noise, vibration and harshness.
- Gas-charged Monroe OESpectrum light truck shock absorber
- Nitrogen gas charge helps keep tires in contact with the road by reducing aeration and shock fade
- All-weather fluid with special additives for extreme temperatures and to help reduce oil breakdown
- Painted black cylinder with a rubber dust shield
Quick facts
- Part: Monroe Shocks & Struts 911517 rear shock absorber
- Fits: 1992-2005 Chevrolet Blazer and other vehicles
- Position: Rear
- Condition: New
A rear end that keeps bouncing after bumps, an oily film on the shock body or a knock from the rear can mean a shock is worn. With the engine off and the vehicle parked, look the shock over for leaks, dents and torn bushings before replacing it. Rear shocks are normally replaced as a pair, and this listing is one shock.
Fits
It also fits the 1992-2005 GMC Jimmy and the 1983-2004 Chevrolet S10, and these take two per vehicle, as does the 1992-2005 Chevrolet Blazer.
Specifications
Fit and size
- Position: Rear
- Quantity per vehicle: 2
- Compressed length: 14.76 in (374.9 mm)
- Extended length: 23.15 in (588 mm)
- Travel length: 8.39 in
- Lower mount: loop (eyelet) bushing and sleeve, 9/16 sleeve ID x 1.5/8 sleeve OAL
- Upper mount: cross pin mount, closed ended, 5/16 hole ID (both ends) x 2.7/8 pin length, code XP7
Build and materials
- Type: gas charged, passive
- Cylinder: painted, black
- Dust shield: rubber, included
- Condition: New
- Warranty: Monroe Limited Lifetime Warranty
- Country of origin: Mexico
In the box
One rear shock absorber with a rubber dust shield. Mounting hardware is not included, so plan on new hardware rather than reusing the old.
Interchange: 12477894 · 342519 · 77349 · 77422 · 565047 · 565064 · 565087 · KG5451 · 210478 · RS55124 · 12140135
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
12477894, 342519, 77349, 77422, 565047, 565064, 565087, KG5451, 210478, 911517, RS55124, 12140135
Frequently Asked Questions
Does the Monroe OESpectrum 911517 fit a 1992-2005 Chevrolet Blazer?
Yes. Monroe Shocks & Struts 911517 is a rear shock for the 1992-2005 Chevrolet Blazer. If your car is not named here, look for it in the "Vehicles it fits" section.
Does the 911517 rear shock come with mounting bolts?
No. Monroe 911517 comes with a rubber dust shield, but mounting hardware is not included.
How long is this rear shock when fully extended?
This shock measures 23.15 in (588 mm) extended and 14.76 in (374.9 mm) compressed, with 8.39 in of travel.
What does a leaking gas-charged rear shock look like?
An oily film on the shock body can mean the seals are worn, and so can bouncing after bumps. Other parts can cause both, so a shop can test the suspension.
What mounts does the Monroe 911517 use?
This shock has a loop (eyelet) bushing and sleeve at the lower end and a closed-ended cross pin mount at the upper end.
