Monroe Shocks & Struts 911536 front shock absorber for the 2007-2017 Jeep Wrangler and other vehicles damps spring movement at the front axle. This monotube unit is designed for vehicles originally equipped with monotube shock absorbers.
- Monroe OESpectrum series monotube shock absorber
- Monotube technology maintains vehicle control over bumps, dips and potholes
- Filters out noise, vibration and harshness
- High-temperature all-weather fluid with special additives to help reduce oil breakdown in extreme temperatures
- Gas-charged body with a rubber dust shield
Quick facts
- Part: Monroe Shocks & Struts 911536 shock absorber
- Fits: 2007-2017 Jeep Wrangler and other vehicles
- Position: Front
- Condition: New
Before you replace this shock, rule out worn springs, bushings or other suspension parts, since a bouncy ride, extra body roll or oil on the shock body can have more than one cause. Front shocks are best replaced together as a pair, and this listing is one shock; the front axle takes one on each side.
Fits
This shock fits the 2007-2017 Jeep Wrangler and the 2018 Jeep Wrangler JK.
Specifications
Fit and size
- Position: Front
- Quantity per vehicle: 2
- Compressed length: 14.02 in (356.1 mm)
- Extended length: 21.93 in (557 mm)
- Travel length: 7.91 in
- Upper mount: Stem mount, 2.3/8 stem length X 3/8-16 thread pitch
- Lower mount: Loop (eyelet) bushing and sleeve mount, 12MM sleeve ID X 1.1/2 sleeve OAL
Build and materials
- Type: Gas-charged monotube, passive suspension
- Dust shield: Rubber, included
- Cylinder: Painted, black
- Condition: New
- Warranty: Monroe Limited Lifetime Warranty
- Country of origin: Mexico
In the box
One shock absorber with mounting hardware and a rubber dust shield.
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Does the Monroe OESpectrum 911536 front shock fit the 2018 Jeep Wrangler JK?
Yes. Monroe Shocks & Struts 911536 is a front shock absorber that fits the 2018 Jeep Wrangler JK and the 2007-2017 Jeep Wrangler.
Does this Monroe OESpectrum shock come with a dust shield and mounting hardware?
Yes. This front shock absorber comes with mounting hardware and a rubber dust shield. The listing is for a single shock.
What are the compressed and extended lengths of the Monroe 911536 shock?
Monroe Shocks & Struts 911536 measures 14.02 in (356.1 mm) compressed and 21.93 in (557 mm) extended, with 7.91 in of travel.
What mount types does this front shock absorber use?
The upper end is a stem mount with a 2.3/8 stem length and 3/8-16 thread pitch. The lower end is a loop (eyelet) bushing and sleeve mount with a 12MM sleeve ID.
What are signs a gas-charged monotube front shock is wearing out?
Oil on the shock body, a bouncy ride or noise from the mounts can be signs of wear. A shop can test the shock to confirm it.
