Monroe Shocks & Struts 172281 front strut assembly for the 2006-2010 Hyundai Sonata and other vehicles combines the strut, coil spring and upper mount in one unit. The strut damps spring movement while the coil spring carries the vehicle's weight at the front axle.
- Monroe Quick-Strut design with the strut, coil spring, upper strut mount and both insulators in one preassembled unit
- Application-specific coil spring calibrated to restore ride height and support the vehicle's weight
- Vehicle-specific spring, mount and strut designs, fit checked and ride tested
- Steel construction with an upper tube and welded design for structural integrity
- Reduces body sway, vibration and road harshness, and the upper mount helps keep steering precise
- Protective coating resists rust and corrosion, and salt spray testing backs it up
Quick facts
- Part: Monroe Shocks & Struts 172281 strut assembly
- Also called: complete strut and coil spring assembly
- Fits: 2006-2010 Hyundai Sonata and other vehicles
- Position: Front
- Condition: New
A clunk over bumps, fluid on the strut body or extra body sway can mean a strut is worn. Before you replace the assembly, rule out tire wear, wheel alignment and worn control arm or tie rod parts, which can produce ride and steering complaints of their own. Front struts are normally replaced as a pair, and this listing is one assembly.
Fits
This assembly fits the 2006-2010 Hyundai Sonata and the 2006-2011 Hyundai Azera.
Specifications
Fit and size
- Position: Front
- Quantity per vehicle: 2
- Compressed length: 12.91 in (327.9 mm)
- Extended length: 16.56 in (420.6 mm)
- Travel length: 3.65 in
- Body length: 12.17 in
Build and materials
- Type: gas charged, passive suspension
- Adjustment: compression and ride height not adjustable
- Finish: protective rust-resistant coating
- Condition: New
- Warranty: Monroe limited lifetime warranty
In the box
One front strut assembly with coil spring, upper strut mount, coil spring insulator, strut mount insulator and mounting hardware. The front axle takes two.
Installation notes
- Arrives fully assembled, so no spring compressor is needed.
Interchange: 2701511837 · 18816705 · LS3380861B · 1335664 · G57149 · 546113K650 · 546113L630 · 546113L640 · SR4502 · SR4503 · SR4562 · 33HY1101 · LS57149 · 815741 · 92130095 · 55S11560 · 11560
This part cross-references / interchanges with the following part numbers:
2701511837, 18816705, LS3380861B, 1335664, G57149, 546113K650, 546113L630, 546113L640, SR4502, SR4503, SR4562, 33HY1101, LS57149, 172281, 815741, 92130095, 55S11560, 11560
Frequently Asked Questions
Does the Monroe Shocks & Struts 172281 fit the 2006-2010 Hyundai Sonata?
Yes. The Monroe Shocks & Struts 172281 is a front strut assembly for the 2006-2010 Hyundai Sonata, and it also fits the 2006-2011 Hyundai Azera.
Is the 172281 a complete strut and coil spring assembly with the mount?
Yes. The Monroe 172281 includes the coil spring, upper strut mount, coil spring insulator, strut mount insulator and mounting hardware, already assembled with the strut.
Is this Monroe Quick-Strut gas charged, and can I adjust it?
Yes, it is gas charged and passive. Neither compression nor ride height is adjustable on this front strut assembly.
What signs can mean a Monroe Quick-Strut is worn out?
A clunk over bumps, fluid on the strut body or extra body sway can point to a worn strut. Look for fluid with the engine off and the vehicle cool.
Do I need a spring compressor to install the 172281 strut assembly?
No. The spring comes already fitted to the strut and mount, so no spring compressor is needed to swap this unit in.
