MOOG Chassis Products Coil Spring Set P/N:81005
MOOG Chassis Products 81127 rear coil spring set for the 2005-2010 Chrysler 300 holds up the rear of the car and absorbs road bumps.
Worn or sagging coil springs can lead to premature tire wear because the car ends up out of alignment, and a lowered rear corner is another thing to look for. These signs alone do not prove the springs are the problem; worn rear shocks can be behind them too.
These coil springs fit the 2005-2010 Chrysler 300, which takes one set at the rear.
Fit and size
Build and materials
Interchange: 566-189 · 589-1171 · 589-1172
45H2175 · 4895322AC · 4895323AC · 4895324AC · 4895324AD · 4895325AD · 4895327AD · CS81127 · DG5891171 · 4414916 · RCS20761S · SMS81127 · 2773598 · 20761
This part cross-references / interchanges with the following part numbers:
Does the MOOG 81127 rear coil spring set fit the 2005-2010 Chrysler 300?
Yes. MOOG Chassis Products 81127 is a rear coil spring set for the 2005-2010 Chrysler 300, and the car takes one set.
What are the wire and outside diameters of this rear coil spring set?
The wire diameter is 16.66 mm (0.66 in) and the outside diameter is 4.270 in. The relaxed length is 340.61 mm (13.41 in).
Is the MOOG 81127 coil spring set load tested?
Yes. MOOG Chassis Products 81127 is 100% load tested and designed to lower stresses for longer service life.
What can worn or sagging rear coil springs do to my tires?
Worn or sagging coil springs can lead to premature tire wear because the vehicle ends up out of alignment. A lowered rear corner is another thing to look for.
Does MOOG 81127 replace part number 4895322AC?
Yes. 4895322AC is one of the numbers listed for MOOG Chassis Products 81127, a rear coil spring set.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.