MOOG Chassis EV801007 front inner tie rod end for the 2010-2024 Toyota 4Runner and other vehicles links the steering rack to the outer tie rod. Also called a steering tie rod end, it carries steering input to the wheels.
- QuickSteer chassis part designed and tested to restore steering and handling
- Wrench flats on the housing and stud for installation and alignment adjustment
- Coated for corrosion resistance
- Tested by MOOG engineers throughout design and development
Quick facts
- Part: MOOG Chassis EV801007 tie rod end
- Also called: steering tie rod end
- Fits: the 2010-2024 Toyota 4Runner and other vehicles
- Position: Front inner
- Condition: New
Looseness in the steering, a knock when turning or uneven front tire wear can mean an inner tie rod end is worn. Ball joints, control arm bushings, wheel bearings or an outer tie rod end may be behind those signs too, so pin down the source before buying. This listing is one tie rod end; the 2010-2024 Toyota 4Runner takes two, so order two and fit them together.
Fits
It fits the 2010-2024 Toyota 4Runner and the 2010-2014 Toyota FJ Cruiser, and is designed for OE fit and function.
Specifications
Fit and size
- Position: Front inner
- Quantity per vehicle: 2
- Sold: individually
Build and materials
- Condition: New
- Grade: Premium
- Finish: coated for corrosion resistance
- Wrench flats on housing and stud
Interchange: 101-7662 · 300-423837 · 543-695
45A2520 · TA5701 · TI74460PR · TI74460 · ES4813 · MS86730 · 2693848 · 4012511 · JAR855 · 4550335070
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
Is this tie rod right for the 2010-2024 Toyota 4Runner?
Yes. MOOG Chassis EV801007 is a front inner tie rod end listed for the 2010-2024 Toyota 4Runner, which takes two.
Are these tie rod ends also for the 2010-2014 Toyota FJ Cruiser?
Yes. The same MOOG Chassis EV801007 front inner tie rod end is listed for the 2010-2014 Toyota FJ Cruiser, which also takes two.
Does this MOOG Chassis tie rod end have a corrosion coating?
Yes. This tie rod end is coated for corrosion resistance.
How can I tell if an inner tie rod end is worn?
Signs can include looseness in the steering, a knock when turning or uneven wear on the front tires. A shop can check the joint for play.
Do the wrench flats on this tie rod end help with alignment?
Yes. MOOG Chassis EV801007 has wrench flats on the housing and stud that make installation and alignment adjustment easier.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review