MOOG Chassis Products RK643615 rear left lower control arm for the 2011-2017 Honda Odyssey links the rear left wheel to the chassis. It lets the wheel move with the suspension while keeping it located.
- Engineered for structural strength
- Precision tolerances for easy installation and steering alignment
- Ball stud shape designed for fatigue life
- Heat treated to inhibit premature failure
- Coated studs and e-coated control arms for corrosion protection
- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
Quick facts
- Part: MOOG Chassis Products RK643615 control arm
- Also called: suspension control arm
- Fits: 2011-2017 Honda Odyssey
- Position: Rear left lower
- Condition: New
Worn bushings or a worn ball stud on a suspension control arm can show up as a clunk over bumps, uneven tire wear or steering that drifts. Other parts can produce similar symptoms, so with the engine off and the car parked, look at the arm's bushings for cracks or tears and its finish for heavy rust before you replace it. A shop can check anything that needs the car raised. Both rear control arms are normally replaced together.
Fits
This is a lower control arm for the 2011 Honda Odyssey and for every model year through 2017.
Specifications
Fit and size
- Position: Rear left lower
- Quantity per application: 1
Build and materials
- Treatment: heat treated
- Finish: coated studs, e-coated control arm
- Condition: New
- Country of origin: China
In the box
One rear left lower control arm. The rear left position takes one, and the rear right side is a separate part ordered on its own.
Interchange: 528-005
TC8082 · CA50153PR · CA59703PR · 52360TK8A00 · 52360TK8A01 · 52360TK8A02 · 5CB60398 · CA50153 · CMS601185
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
Is this a lower control arm for the 2013 Honda Odyssey?
Yes. MOOG Chassis Products RK643615 fits the 2011-2017 Honda Odyssey, which includes 2013, in the rear left lower position.
Is the rear lower control arm for the 2011-2017 Honda Odyssey in this listing the left or right one?
This arm is the rear left. The rear right side takes a different part.
What are the bushings on the MOOG RK643615 control arm designed to do?
The bushings are optimized for quiet operation and for resistance to wear, salt, road grime and oils.
Why is this control arm heat treated?
Heat treatment is there to inhibit premature failure. The arm is heat treated to match or exceed OE requirements.
Does RK643615 interchange with 52360TK8A00?
Yes. MOOG RK643615 replaces 52360TK8A00, along with 52360TK8A01 and 52360TK8A02.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review