Ignition Coil for 2007-2020 Mitsubishi Outlander & More - NGK 48847

NGK 48847 ignition coil for the 2007-2020 Mitsubishi Outlander V6 3.0L, the 2008-2013 Outlander 4-cylinder 2.4L and other vehicles turns battery voltage into the high-voltage spark that lights the fuel in a cylinder. This NGK coil pack has the following design and build points.

• Vacuum-sealed epoxy resin and thermoplastic housing for dielectric strength and voltage insulation
• Precision coil windings and laminations to maximize output
• Custom NGK ASIC chipset for efficiency and to help prevent component damage
• Ignition control module and high temperature coil boot, with jumper harnesses where required
• Must pass extreme testing during manufacturing

Quick facts

• Part: NGK 48847 ignition coil
• Fits: the 2007-2020 Mitsubishi Outlander V6 3.0L, the 2008-2013 Outlander 4-cylinder 2.4L and other vehicles
• Condition: New

A weak coil can show up as a misfire, a rough idle or a lit check engine light. Before you replace this coil, rule out worn spark plugs and a loose or damaged connector as the cause of the misfire.

Fits

The 2007-2020 Mitsubishi Outlander V6 3.0L, the 2008-2013 Outlander 4-cylinder 2.4L, the 2008-2017 Mitsubishi Lancer 4-cylinder 2.0L and the 2009-2017 Lancer 4-cylinder 2.4L all take this coil, and it fits more vehicles besides. If your car is not named here, look it up in the "Vehicles it fits" section. The 2007-2020 Outlander V6 3.0L takes six; the 2008-2013 Outlander 4-cylinder 2.4L, the 2008-2017 Lancer 4-cylinder 2.0L and the 2009-2017 Lancer 4-cylinder 2.4L take four.

Specifications

• Connector quantity: 1
• NGK part number: U5171
• Condition: New
• Warranty: NGK 3 year/36,000 mile warranty

Interchange: 178-8501 · UF-589 · 921-2156
84150503 · E1089 · GN10519 · IC669 · 1832A016 · U5171

Product information is for general reference and may contain errors. See our Disclaimer.