Nugeon Disc Brake Caliper P/N:97-09343A
Nugeon 97-01708B front left brake caliper for the 2008-2011 Toyota Land Cruiser and other vehicles clamps the brake pads against the rotor to slow the wheel. This remanufactured Nugeon brake caliper mounts at the front left wheel.
A caliper that leaks fluid at the piston boot, drags at the wheel or pulls the car to one side can be due for replacement. Those signs alone do not prove the caliper is at fault, since a worn brake hose is another common cause. This listing is one caliper for the front left; the front right is a separate part, and the two are normally replaced together.
This is a brake caliper for the 2008-2011 and 2013-2015 Toyota Land Cruiser and the 2008-2011 and 2013-2015 Lexus LX570. The 2008-2011 Toyota Land Cruiser takes one on the front left.
Fit and size
Build and materials
One caliper with the bleeder screw, dust boots and crush washers. Brake pads, bracket, bracket mounting bolts, mounting bolts, caliper and pad hardware, anti-squeal shims, wear sensors and the bleeder screw cap are not included. Plan on new bolts, since the old ones may not be reusable.
Does the Nugeon 97-01708B fit the 2013-2015 Lexus LX570?
Yes. Nugeon 97-01708B is a front left brake caliper for the 2013-2015 Lexus LX570, and the front right side takes its own caliper.
Does the Nugeon caliper come with brake pads?
No. This front left caliper comes with the bleeder screw, dust boots and crush washers. Pads, bracket, bracket bolts, shims and wear sensors are not included.
How many pistons does this disc brake caliper have?
Nugeon 97-01708B has four steel pistons, each 51 mm (2.008 in) in diameter, in a fixed caliper with a cast iron casting.
What should I look for on a caliper during a brake service?
During a brake service with the wheel off, look for fluid wetness around the dust boots or the banjo bolt fitting, and for torn boots. Any brake fluid leak needs prompt attention.
What is the cast number on the 97-01708B caliper housing?
The housing cast numbers on Nugeon 97-01708B are 15WA / 15WA. Its inlet is a banjo bolt fitting with an M10-1.0 x 27.32 mm port thread.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.