Front Left Brake Caliper for 2002-2005 Hyundai Elantra - Nugeon 99-00818A
Nugeon 99-00818A front left brake caliper for the 2002-2005 Hyundai Elantra squeezes the brake pads against the rotor to slow the wheel. This remanufactured Nugeon brake caliper, also called a disc brake caliper, replaces the unit on the front left wheel.
- Floating caliper with a single 54 mm steel piston
- Cast iron housing with a rust-preventative finish
- Banjo bolt inlet fitting with an M10-1.0 thread
- Bleeder screw with its cap, M10-1.0 thread
Quick facts
- Part: Nugeon 99-00818A brake caliper
- Also called: disc brake caliper
- Fits: 2002-2005 Hyundai Elantra
- Position: Front left
- Material: Cast iron (housing), steel (piston)
- Condition: Remanufactured
A pull to one side, uneven pad wear or fluid around the dust boot can mean a caliper is sticking or leaking. These signs alone do not prove the caliper is at fault, since a worn brake hose can also make the car pull.
Fits
It is a brake caliper replacement for the 2002-2005 Hyundai Elantra, which takes one on each side of the front axle. This listing is the front left caliper only; the front right is a separate part, and the other side of that axle is normally done at the same time.
Specifications
Fit and size
- Position: Front left
- Quantity per application: 1
- Piston diameter: 54 mm (2.13 in)
- Inlet fitting: Banjo bolt, M10-1.0 thread
- Housing cast number: BC140069
- Bracket cast number: 560
Build and materials
- Type: Floating, remanufactured
- Housing material: Cast iron
- Piston material: Steel
- Finish: Rust preventative
- Country of origin: Mexico
In the box
One remanufactured caliper with its bracket, caliper slides, dust boots, caliper and pad hardware, and crush washers. Brake pads, wear sensors, anti-squeal shims and mounting bolts are not included, so plan on new bolts.
Interchange / FMSI:
FMSI: D941
Frequently Asked Questions
Is this 2002-2005 Hyundai Elantra brake caliper the front left one?
Yes. Nugeon 99-00818A is the front left caliper for the 2002-2005 Hyundai Elantra. The front right side takes a separate caliper.
Does the Nugeon caliper come with the bracket?
Yes. This caliper includes the bracket, caliper slides, dust boots and hardware. Brake pads, wear sensors, anti-squeal shims and mounting bolts are not included.
What size is the piston on this brake caliper?
Nugeon 99-00818A has one steel piston, 54 mm (2.13 in) across. Its inlet is a banjo bolt fitting with an M10-1.0 thread.
What are signs a floating brake caliper is sticking?
The car may pull to one side, one pad may wear faster than its partner, or fluid may show around the dust boot. A shop can confirm the cause.
Does this caliper include the bleeder screw?
Yes. Nugeon 99-00818A comes with a bleeder screw and its cap, M10-1.0 thread, plus crush washers.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review