Nugeon 99-00852A front left brake caliper for the 2005-2010 Kia Sportage and other vehicles clamps the pads against the rotor to slow the wheel. This remanufactured brake caliper is also called a disc brake caliper and has a single piston.
- Cast iron caliper housing
- Steel piston with a 60 mm (2 in) outside diameter
- Rust preventative finish
- Banjo bolt inlet fitting with an M10-1.0 x 23.4 inlet port thread
- Bleeder screw thread of M10-1.0 x 28
Quick facts
- Part: Nugeon 99-00852A brake caliper
- Also called: disc brake caliper
- Fits: 2005-2010 Kia Sportage and other vehicles
- Position: Front left
- Material: Cast iron housing, steel piston
- Condition: Remanufactured
Pulling to one side while braking, or brake fluid around the wheel, can mean a caliper is sticking or leaking. Before you replace this caliper, rule out worn pads, a damaged brake hose or a seized slide as the source of those signs.
Fits
This front left caliper is a direct-fit replacement for the 2005-2010 Kia Sportage and the 2005-2009 Hyundai Tucson. This listing is one caliper for the front left wheel; the front right is a separate part, and the other side of the front axle is normally done at the same time. A 2005-2009 Hyundai Tucson takes one caliper at this wheel position.
Specifications
Fit and size
- Position: Front left
- Quantity per vehicle: 1
- Piston quantity: 1
- Piston outside diameter: 60 mm (2 in)
- Inlet fitting: Banjo bolt, inlet port thread M10-1.0 x 23.4
- Bleeder screw thread: M10-1.0 x 28
Build and materials
- Condition: Remanufactured
- Housing material: Cast iron
- Piston material: Steel
- Finish: Rust preventative
- Housing cast number: BC140092
- Country of origin: Mexico
In the box
One brake caliper with its bracket, caliper slides, dust boots, bleeder screw, one banjo bolt and crush washers. Bracket mounting bolts, caliper and pad hardware, anti-squeal shims, pads, wear sensors and the bleeder screw cap are not included, so plan on new bracket mounting bolts rather than reusing the old ones.
Frequently Asked Questions
Is this brake caliper made for the front left wheel of the 2005-2009 Hyundai Tucson?
Yes. Nugeon 99-00852A is a front left brake caliper for the 2005-2009 Hyundai Tucson, and the 2005-2010 Kia Sportage takes it too. The front right wheel needs its own caliper.
Does the Nugeon brake caliper 99-00852A come with the bracket and brake pads?
The Nugeon 99-00852A includes the bracket, caliper slides, dust boots, bleeder screw, banjo bolt and crush washers. Pads, anti-squeal shims, wear sensors, bracket mounting bolts and the bleeder screw cap are not included.
What size is the piston on the Nugeon caliper?
This front left caliper has one steel piston with a 60 mm (2 in) outside diameter.
Which thread sizes does this caliper use for the banjo bolt and bleeder screw?
The banjo bolt inlet port thread is M10-1.0 x 23.4, and the bleeder screw thread is M10-1.0 x 28.
How can I tell a front caliper is sticking?
Signs can include uneven pad wear on one side, or a wheel that feels like it drags. Because this is a brake part, have a shop inspect it promptly.
