TERREPOWER 99-01257A front left brake caliper for the 2007-2020 Mitsubishi Outlander and other vehicles clamps the brake pads against the rotor to slow the wheel. This is a remanufactured caliper.
- Floating caliper design with a single steel piston 57 mm in diameter
- Cast iron housing with a rust preventative finish
- Bracket, caliper slides, dust boots and bleeder screw included
- Banjo bolt inlet fitting with a crush washer included
Quick facts
- Part: TERREPOWER 99-01257A brake caliper
- Also called: disc brake caliper
- Fits: the 2007-2020 Mitsubishi Outlander and other vehicles
- Position: front left
- Material: cast iron housing, steel piston
- Condition: Remanufactured
A car that pulls to one side under braking, pads that wear unevenly or fluid around the caliper can mean this caliper is worn. A brake hose or a sticking pad can be behind the same signs, so find out which part is at fault before you replace the caliper.
Fits
The vehicles it fits include the 2007-2020 Mitsubishi Outlander, the 2011-2020 Mitsubishi Outlander Sport and the 2011-2020 Mitsubishi RVR, among many others. Open the "Vehicles it fits" section and look up your exact model and engine. Replace calipers as a pair across the axle: this listing is one front left caliper, and the front right is a separate part. At the front left, the 2007-2020 Mitsubishi Outlander takes one caliper.
Specifications
Fit and size
- Position: front left
- Quantity at this position: 1
- Piston diameter: 57 mm (2.244 in), 1 piston
- Inlet fitting: banjo bolt, port thread M10-1.0 x 23.4 mm
- Bleeder screw thread: M7-1.0
- Housing cast number: 5736
- Bracket cast number: 5737
Build and materials
- Caliper type: floating
- Condition: remanufactured
- Housing material: cast iron
- Piston material: steel
- Finish: rust preventative
- Country of origin: Mexico
In the box
One remanufactured front left brake caliper with its bracket, caliper slides, dust boots, bleeder screw and crush washer. Pads, anti-squeal shims, the bleeder screw cap, bracket mounting bolts, mounting bolts, caliper and pad hardware and wear sensors are not included, so plan on new bolts, since the old ones may not be reusable.
Frequently Asked Questions
Is TERREPOWER 99-01257A a Mitsubishi Outlander brake caliper for the 2007-2020 model years?
Yes. TERREPOWER 99-01257A is the front left caliper for the 2007-2020 Mitsubishi Outlander; the front right is a separate part. Open the "Vehicles it fits" section for your exact model and engine.
Does this disc brake caliper come with brake pads?
No. This listing is one front left caliper with its bracket, slides, dust boots and bleeder screw. Pads, anti-squeal shims and bracket mounting bolts are not included.
What piston size does this front left caliper have?
TERREPOWER 99-01257A is a floating caliper with one steel piston, 57 mm (2.244 in) across.
How can I tell if a front left brake caliper is going bad?
The car can pull toward one side when braking, the pads can wear unevenly, or brake fluid can show around the caliper. A shop can test the brake system.
What thread does the inlet on this brake caliper use?
The inlet is a banjo bolt fitting with an M10-1.0 x 23.4 port thread, and a crush washer is included. The bleeder screw thread is M7-1.0.
