Rear Left Brake Caliper for 2000-2004 Subaru Outback & More - Nugeon 99-01332B

Be the first to review this product
$149.99
WARNING:California Proposition 65▾
MPN: 99-01332B
Item Package Code: EA
Part Has Core (Y/N): N
Item Package Quantity: 1
Adding to cart… The item has been added

Have questions?

Nugeon Disc Brake Caliper P/N:99-01332B
Nugeon Disc Brake Caliper P/N:99-01332B
$149.99

Nugeon 99-01332B rear left brake caliper for the 2000-2004 Subaru Outback and other vehicles clamps the brake pad against the rotor to slow the wheel. This caliper is remanufactured.

  • Floating design with a single steel piston, 37.92 mm (1.49 in) in diameter
  • Cast iron housing with a rust-preventative finish
  • Banjo inlet fitting with an M10-1.0 x 23.4 port thread
  • Bleeder screw with an M7-1.0 thread included

Quick facts

  • Part: Nugeon 99-01332B brake caliper
  • Also called: disc brake caliper
  • Fits: 2000-2004 Subaru Outback and other vehicles
  • Position: Rear left
  • Material: Cast iron
  • Condition: Remanufactured

A pull toward one side under braking, uneven pad wear or brake fluid around the caliper or its dust boot can mean this caliper is worn. A damaged brake hose or a worn rear rotor can bring on similar symptoms, so find which part is at fault before replacing the caliper.

Fits

As a brake caliper replacement for the 2000-2004 Subaru Outback, it also fits the 2000-2004 Subaru Legacy and the 2003-2006 Subaru Baja, and each takes one caliper on this side. This listing is a single caliper, so the rear right is ordered separately, and the pair is normally replaced together.

Specifications

Fit and size

  • Position: Rear left
  • Quantity per vehicle: 1 (this side)
  • Piston quantity: 1
  • Piston outside diameter: 37.92 mm (1.49 in)
  • Inlet port thread: M10-1.0 x 23.4 mm
  • Bleeder screw thread: M7-1.0

Build and materials

  • Condition: Remanufactured
  • Caliper type: Floating
  • Inlet fitting: Banjo
  • Housing material: Cast iron
  • Piston material: Steel
  • Finish: Rust preventative
  • Cast numbers: housing 3820, R; bracket 3820
  • Country of origin: Mexico

In the box

One caliper with its bracket, slides, dust boots, bleeder screw, crush washers, and caliper and pad hardware. Not included: brake pads, wear sensors, anti-squeal shims, the bleeder screw cap and the mounting bolts, so plan on new bolts.

Frequently Asked Questions

Is this rear left caliper right for a 2000-2004 Subaru Outback?

Yes. Nugeon 99-01332B fits the rear left of the 2000-2004 Subaru Outback; the rear right takes a separate caliper.

Does the 2003-2006 Subaru Baja take this brake caliper?

Yes. This rear left caliper fits the 2003-2006 Subaru Baja, one caliper for that side; the other side is ordered separately.

Does this Nugeon brake caliper come with the bracket and bleeder screw?

Yes. Nugeon 99-01332B includes the bracket and bleeder screw, plus slides, dust boots, crush washers and caliper and pad hardware. Pads, shims, wear sensors and bracket mounting bolts are not included, so plan on new bolts.

Is this Nugeon caliper a floating design?

Yes. Nugeon 99-01332B is a floating caliper with one steel piston, 37.92 mm across, and a banjo inlet with an M10-1.0 x 23.4 port thread.

What bleeder screw thread does this disc brake caliper use?

The bleeder screw is M7-1.0 and is included with this rear left caliper. The bleeder screw cap is not included.