Remanufactured Rear Right Brake Caliper for 2015-2025 Subaru Outback & More - Nugeon 99-01351A
Nugeon 99-01351A rear right brake caliper for the 2015-2025 Subaru Outback and other vehicles clamps the brake pads against the rotor to slow the wheel. This remanufactured Nugeon brake caliper is a floating design.
- Cast iron caliper body with a rust-preventative finish
- Single steel piston, 40 mm (1.57 in) in diameter
- Banjo bolt inlet fitting with an M10-1.0 thread
- Bleeder screw with an M10-1.0 thread
Quick facts
- Part: Nugeon 99-01351A brake caliper
- Also called: disc brake caliper
- Fits: 2015-2025 Subaru Outback and other vehicles
- Position: Rear right
- Material: Cast iron housing and steel piston
- Condition: Remanufactured
A brake that pulls to one side, a wheel that drags or a fluid leak at the piston boot can mean this caliper is worn, though a collapsed brake hose or a stuck slide pin can also be behind them, so find the cause before replacing it.
Fits
Calipers on one axle are normally replaced as a pair, and this listing is a single caliper for the rear right; the rear left is a separate part. It works as a Subaru Outback caliper for the 2015-2025 model years and also fits the 2015-2024 Subaru Legacy and the 2016-2018 Subaru WRX, and each takes one at the rear right.
Specifications
Fit and size
- Position: Rear right
- Quantity per vehicle: 1
- Piston diameter: 40 mm (1.57 in)
- Piston quantity: 1
- Inlet fitting: Banjo bolt, M10-1.0 thread
- Bleeder screw thread: M10-1.0
Build and materials
- Caliper type: Floating
- Condition: Remanufactured
- Housing material: Cast iron
- Piston material: Steel
- Finish: Rust preventative
- Country of origin: Mexico
In the box
One remanufactured rear right brake caliper with its mounting bracket, caliper slides, caliper and pad hardware, dust boots, bleeder screw and cap, and crush washers. Brake pads, anti-squeal shims, wear sensors and bracket mounting bolts are not included; plan on new bolts, since the old ones may not be reusable.
Interchange / FMSI:
FMSI: D1808
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Does this WRX brake caliper fit the rear right of 2016-2018 models?
Yes. Nugeon 99-01351A fits the 2016-2018 Subaru WRX at the rear right, and the car takes one at that corner.
Is this a Subaru Outback brake caliper replacement for the 2015-2025 model years?
Yes. Nugeon 99-01351A is a rear right caliper that fits the 2015-2025 Subaru Outback. The rear left is ordered separately.
Does the Nugeon caliper come with brake pads?
No. Brake pads, anti-squeal shims, wear sensors and bracket mounting bolts are not included. The listing does include the mounting bracket, slides, pad hardware and dust boots.
Why does one rear pad wear faster with a sticking floating caliper?
A floating caliper that does not slide freely can press one pad harder than the other. That can show up as uneven pad wear, a dragging wheel or the car pulling to one side.
What thread does this Nugeon disc brake caliper use for the inlet and bleeder?
The inlet is a banjo bolt fitting with an M10-1.0 thread, and the bleeder screw is M10-1.0. Crush washers and the bleeder screw cap are included.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review