Front Left Brake Caliper for 1999-2005 Suzuki Grand Vitara & More - Nugeon 99-01404B

$113.99
WARNING:California Proposition 65▾

Vehicles this part fits

    Part number: 99-01404B
    UPC: 736749368766
    Condition: New
    Weight: 9.00 LBS
    Item Package Code: EA
    Part Has Core (Y/N): N
    Item Package Quantity: 1
    $113.99
    Adding to cart… The item has been added

    Have questions?

    Nugeon Disc Brake Caliper P/N:99-01404B
    Nugeon Disc Brake Caliper P/N:99-01404B
    $113.99
    $113.99

    Nugeon 99-01404B front left brake caliper for the 1999-2005 Suzuki Grand Vitara and other vehicles clamps the brake pads against the rotor to slow the wheel. This remanufactured disc brake caliper mounts at the front left wheel.

    • Floating caliper with one steel piston
    • Cast iron housing with a rust-preventative finish
    • Banjo inlet fitting with an M10-1.0 port thread
    • Housing cast number 17X L and bracket cast number 17X

    Quick facts

    • Part: Nugeon 99-01404B brake caliper
    • Also called: disc brake caliper
    • Fits: the 1999-2005 Suzuki Grand Vitara and other vehicles
    • Position: Front left
    • Material: Cast iron housing, steel piston
    • Condition: Remanufactured

    Pulling to one side under braking, uneven pad wear or brake fluid around the caliper can mean this caliper is worn, though a collapsed brake hose or worn pads can also be behind those signs, so find which part is at fault before you replace it.

    Fits

    It is a direct-fit replacement front brake caliper for the 1999-2005 Suzuki Grand Vitara, the 1996-1998 Suzuki Sidekick and the 2002-2004 Suzuki XL-7. The car has one caliper on each side of the front axle; this listing is the front left one, the front right is ordered separately, and the two are normally replaced together.

    Specifications

    Fit and size

    • Position: Front left
    • Quantity per application: 1
    • Piston quantity: 1
    • Piston outside diameter: 57.12 mm (2.25 in)
    • Inlet fitting: Banjo, M10-1.0 x 23.4 mm port thread
    • Bleeder screw thread: M8-1.0

    Build and materials

    • Caliper type: Floating
    • Condition: Remanufactured
    • Housing material: Cast iron
    • Piston material: Steel
    • Finish: Rust preventative
    • Caliper manufacturer: Tokico
    • Country of origin: Mexico

    In the box

    One caliper with its bracket, caliper slides, dust boots, pad hardware, bleeder screw and crush washers. Brake pads, anti-squeal shims, wear sensors, the bleeder screw cap and the bracket mounting bolts are not included, so plan on new mounting bolts.

    Interchange / FMSI:

    FMSI: D680

    Frequently Asked Questions

    Does this 1996-1998 Suzuki Sidekick brake caliper fit the front left side?

    Yes. Nugeon 99-01404B is the front left caliper for the 1996-1998 Suzuki Sidekick. The front right side takes its own caliper.

    What is included with this Nugeon brake caliper?

    It comes with the bracket, caliper slides, dust boots, pad hardware, bleeder screw and crush washers. Pads, shims, wear sensors and bracket mounting bolts are not included.

    What size is the inlet fitting on this Nugeon caliper?

    The inlet is a banjo fitting with an M10-1.0 x 23.4 mm port thread. The bleeder screw is M8-1.0.

    How can I tell if a front caliper is sticking?

    A pull to one side when braking or pads worn unevenly can mean a caliper is sticking, though other brake parts can produce them too. A shop can confirm which part is at fault.

    Is the 99-01404B a floating caliper, and what is the piston made of?

    Yes. Nugeon 99-01404B is a floating caliper with one steel piston, 57.12 mm (2.25 in) in outside diameter, and a cast iron housing.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review