Front Right Brake Caliper for 2001-2003 Toyota Sienna - Nugeon 99-01664B

$128.99
WARNING:California Proposition 65▾

Vehicles this part fits

    Part number: 99-01664B
    UPC: 736749371735
    Condition: New
    Weight: 12.80 LBS
    Item Package Code: EA
    Part Has Core (Y/N): N
    Item Package Quantity: 1
    $128.99
    Adding to cart… The item has been added

    Have questions?

    Nugeon Disc Brake Caliper P/N:99-01664B
    Nugeon Disc Brake Caliper P/N:99-01664B
    $128.99
    $128.99

    Nugeon 99-01664B front right brake caliper for the 2001-2003 Toyota Sienna clamps the pads against the rotor to slow the vehicle. This remanufactured Nugeon brake caliper is a floating design.

    • Single steel piston that pushes the brake pad toward the rotor
    • Cast iron housing with a rust-preventative finish
    • Banjo inlet fitting with an M10-1.0 port thread

    Quick facts

    • Part: Nugeon 99-01664B brake caliper
    • Also called: disc brake caliper
    • Fits: 2001-2003 Toyota Sienna
    • Position: Front right
    • Material: Cast iron
    • Condition: Remanufactured

    Pulling to one side under braking, brake fluid around the caliper or a pad that wears much faster than its neighbor can mean this caliper is worn, though a collapsed brake hose or a sticking slide can be behind the same signs, so find the actual cause before you replace it.

    Fits

    This brake caliper for the 2001-2003 Toyota Sienna is a direct-fit replacement for the front right side. One caliper goes on each side of the front axle; this listing is the front right one, the front left is a separate part, and the other side of that axle is normally done at the same time.

    Specifications

    Fit and size

    • Position: front right
    • Quantity per application: 1
    • Piston outside diameter: 63.37 mm (2.5 in)
    • Piston diameter: 63 mm (2.48 in)
    • Piston quantity: 1
    • Inlet port thread: M10-1.0 x 23.4 mm
    • Bleeder screw thread: M7-1.0
    • Cast numbers: housing 63-28 6 L, bracket 4 L

    Build and materials

    • Caliper type: floating
    • Inlet fitting: banjo
    • Housing material: cast iron
    • Piston material: steel
    • Finish: rust preventative
    • Condition: remanufactured
    • Country of origin: Mexico

    In the box

    One remanufactured caliper with its mounting bracket, caliper slides, dust boots, caliper and pad hardware, bleeder screw and crush washer. Brake pads, anti-squeal shims, wear sensors, the bleeder screw cap and the mounting bolts are not included, so plan on new bolts.

    Interchange / FMSI:

    FMSI: D476

    Frequently Asked Questions

    Is this the front brake caliper for the 2001-2003 Toyota Sienna?

    Yes. Nugeon 99-01664B is the front right caliper for the 2001-2003 Toyota Sienna; the front left side is a separate part.

    Does the Nugeon caliper come with brake pads?

    No. Brake pads, anti-squeal shims and wear sensors are not included. The bracket, slides, dust boots, pad hardware and bleeder screw are.

    What piston size does this disc brake caliper have?

    Nugeon 99-01664B has one steel piston with a 63.37 mm (2.5 in) outside diameter, in a floating caliper design.

    What inlet fitting and bleeder thread does this caliper use?

    The inlet is a banjo fitting with an M10-1.0 x 23.4 port thread, and the bleeder screw is M7-1.0. The bleeder screw is included; its cap is not.

    What signs can point to a worn front brake caliper?

    Pulling to one side while braking, brake fluid around the caliper or uneven pad wear can mean a caliper problem. A brake leak or pulling should be looked at promptly.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review