Rear Right Brake Caliper for 2006-2007 Toyota Highlander & More - Nugeon 99-01677A
Nugeon 99-01677A rear right brake caliper for the 2006-2007 Toyota Highlander and other vehicles clamps the pads against the rotor to slow the wheel. This remanufactured Nugeon brake caliper is a floating design, also called a disc brake caliper.
- Floating caliper with one 41 mm steel piston
- Cast iron caliper body with a rust-preventative finish
- Banjo bolt inlet fitting with an M10-1.0 x 23.4 port thread
- M7-1.0 bleeder screw for bleeding the brake
Quick facts
- Part: Nugeon 99-01677A brake caliper
- Also called: disc brake caliper
- Fits: 2006-2007 Toyota Highlander and other vehicles
- Position: Rear right
- Material: Cast iron
- Condition: Remanufactured
A sticking or leaking caliper can show up as the vehicle pulling to one side, uneven pad wear or fluid around the wheel. A worn rotor, tired pads or a damaged brake hose can be behind the same signs, so find the cause before buying a caliper.
Fits
This caliper is listed for several Toyota and Lexus models. Used as a Toyota Highlander brake caliper replacement, it fits the 2006-2007 Highlander, and it also fits the 2007-2009 Lexus RX350 and the 2006-2008 Lexus RX400h. Open the "Vehicles it fits" section to check your exact model and engine. This listing is one caliper for the rear right wheel; each axle takes one on each side, so the rear left is a separate part ordered separately, and the two are normally replaced together.
Specifications
Fit and size
- Position: Rear right
- Quantity per wheel position: 1
- Piston diameter: 41 mm (1.614 in)
- Piston quantity: 1
- Inlet fitting: Banjo bolt, port thread M10-1.0 x 23.4 mm
- Bleeder screw thread: M7-1.0
Build and materials
- Caliper type: Floating
- Condition: Remanufactured
- Caliper casting material: Cast iron
- Piston material: Steel
- Finish: Rust preventative
- Country of origin: Mexico
In the box
One remanufactured brake caliper with its bracket, caliper slides, dust boots, bleeder screw, crush washers and mounting hardware. Brake pads, anti-squeal shims, wear sensors, the bleeder screw cap, caliper and pad hardware and the bracket mounting bolts are not included, so plan on new bracket bolts.
Frequently Asked Questions
Is this the Toyota Highlander brake caliper for the rear right wheel of a 2006-2007 Highlander?
Yes. Nugeon 99-01677A is a rear right caliper listed for the 2006-2007 Toyota Highlander. For another model, open the "Vehicles it fits" section and check your exact engine.
Does this work as a Lexus RX350 brake caliper on a 2007-2009 Lexus RX350?
Yes. This rear right Nugeon 99-01677A caliper is listed for the 2007-2009 Lexus RX350. The rear left wheel takes its own caliper, ordered separately.
Does the Nugeon caliper come with brake pads?
No. Pads, anti-squeal shims, wear sensors and bracket mounting bolts are not included. The caliper comes with its bracket, slides, dust boots, bleeder screw and crush washers.
What size is the piston on this remanufactured caliper?
This floating caliper has one steel piston that measures 41 mm (1.614 in) across. Its banjo bolt inlet has an M10-1.0 x 23.4 port thread.
What can a sticking rear right caliper cause?
Uneven pad wear, fluid around the wheel or the vehicle pulling to one side can be signs of a caliper problem. A shop can test it, and a failing brake should be checked or replaced promptly.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review