Rear Left Brake Caliper for 2007-2015 Toyota Tundra & More - Nugeon 99-01700B
Nugeon 99-01700B rear left brake caliper for the 2007-2015 Toyota Tundra and other vehicles squeezes the pads against the rotor to slow the wheel. This remanufactured disc brake caliper is a floating design with a single steel piston.
- Floating caliper design with one steel piston
- Cast iron housing with a rust-preventative finish
- Bracket, caliper slides, dust boots and caliper and pad hardware included
- Banjo inlet fitting, with crush washer(s) included
- Bleeder screw included, M7-1.0 thread
Quick facts
- Part: Nugeon 99-01700B brake caliper
- Also called: disc brake caliper
- Fits: 2007-2015 Toyota Tundra and other vehicles
- Position: Rear left
- Material: Cast iron housing
- Condition: Remanufactured
Pulling to one side under braking, a rear wheel that drags, or fluid around the dust boot can mean this caliper is worn, but a swollen rear brake hose or the pad hardware may be behind them, so find the cause before replacing it. Calipers are normally replaced in pairs, and this listing is one; the rear right side is ordered separately.
Fits
It fits the 2007-2015 Toyota Tundra and the 2008-2015 Toyota Sequoia.
Specifications
Fit and size
- Position: Rear left
- Quantity per application: 1
- Piston outside diameter: 48.03 mm (1.89 in)
- Inlet port thread: M10-1.0 x 23.4 mm
- Bleeder screw thread: M7-1.0
- Banjo bolt quantity: 1
Build and materials
- Caliper type: Floating
- Casting material: Cast iron
- Piston material: Steel
- Finish: Rust preventative
- Housing cast numbers: F14G, R
- Condition: Remanufactured
- Country of origin: Mexico
In the box
One remanufactured rear left brake caliper with its bracket, caliper slides, dust boots, bleeder screw, crush washer(s) and caliper and pad hardware. The rear left takes one caliper. Brake pads, anti-squeal shims, wear sensors, the bleeder screw cap and the mounting bolts are not included; plan on new bolts, since the old ones may not be reusable.
Frequently Asked Questions
Which side are these 2007-2015 Toyota Tundra brake calipers for?
Nugeon 99-01700B is the rear left caliper for the 2007-2015 Toyota Tundra and the 2008-2015 Toyota Sequoia. The rear right side is a separate part.
Does the Nugeon brake caliper come with brake pads?
No. Nugeon 99-01700B comes with the bracket, slides, dust boots, bleeder screw and hardware. Pads, anti-squeal shims, wear sensors and mounting bolts are not included.
How big is the piston on this rear left brake caliper?
The single steel piston measures 48.03 mm (1.89 in) across. The inlet is a banjo fitting with an M10-1.0 x 23.4 port thread.
What can a sticking rear left brake caliper feel like?
Pulling to one side when braking, a rear wheel that drags, or fluid around the dust boot or banjo fitting can mean the caliper is worn. A shop can confirm it with a brake inspection.
What bleeder thread does the Nugeon caliper use?
The bleeder screw that comes with this rear left caliper is M7-1.0 thread. The bleeder screw cap is not included.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review