TERREPOWER 99-01732A rear left brake caliper for the 2009-2013 Toyota Matrix and other vehicles squeezes the pads against the rotor to slow the wheel. This remanufactured disc brake caliper has a floating design.
- Single steel piston, 38 mm in diameter
- Aluminum casting with a rust-preventative finish
- Mounting bracket, caliper slides and dust boots included
- Banjo bolt inlet with an M10-1.0 thread and a crush washer included
- Bleeder screw with an M7-1.0 thread included
Quick facts
- Part: TERREPOWER 99-01732A brake caliper
- Also called: disc brake caliper
- Fits: 2009-2013 Toyota Matrix and other vehicles
- Position: Rear left
- Material: Aluminum casting, steel piston
- Condition: Remanufactured
Pulling to one side, a dragging brake or fluid around the caliper can mean it needs replacing. Before you replace it, rule out worn pads, a sticking slide pin and a damaged brake hose. The car takes one caliper on each side of the rear axle; this listing is the rear left, the rear right is ordered separately, and both are normally replaced together.
Fits
It is a direct-fit replacement for the 2009-2013 Toyota Matrix, and it is also a brake caliper for the 2009-2010 Pontiac Vibe.
Specifications
Fit and size
- Position: Rear left
- Quantity per vehicle: 1 for this position
- Piston outside diameter: 38 mm (1.496 in)
- Piston quantity: 1
- Inlet fitting: banjo bolt, M10-1.0 x 27.32 mm thread
- Bleeder screw thread: M7-1.0
Build and materials
- Caliper type: Floating
- Condition: Remanufactured
- Casting material: Aluminum
- Piston material: Steel
- Finish: Rust preventative, natural color
- Country of origin: Mexico
In the box
One caliper with its mounting bracket, caliper slides, dust boots, bleeder screw and crush washer. Brake pads, anti-squeal shims, wear sensors, caliper and pad hardware, bracket mounting bolts and the bleeder screw cap are not included, so plan on new bracket bolts.
Frequently Asked Questions
Is this the right caliper for the 2009-2013 Toyota Matrix?
Yes. TERREPOWER 99-01732A is the rear left brake caliper for the 2009-2013 Toyota Matrix. The rear right side is a separate part.
What comes with the TERREPOWER 99-01732A caliper?
This rear left caliper comes with the mounting bracket, caliper slides, dust boots, bleeder screw and crush washer. Pads, shims, wear sensors and bracket mounting bolts are not included.
How big is the piston on this rear left caliper?
This floating caliper has one steel piston that measures 38 mm (1.496 in) across, in an aluminum casting.
What can a failing rear brake caliper look like?
Signs can include pulling to one side, a dragging or noisy brake, or brake fluid around the caliper. Have it inspected promptly, because it is part of the brakes.
Does the TERREPOWER 99-01732A use a banjo bolt for the brake hose?
Yes. The TERREPOWER 99-01732A has a banjo bolt inlet with an M10-1.0 x 27.32 mm thread, and a crush washer is included. The bleeder screw is M7-1.0.
