Nugeon 99-01766A rear right brake caliper for the 2018-2024 Toyota Camry clamps the pads against the rotor to slow the wheel. This remanufactured Nugeon brake caliper has a floating design with a single steel piston.
- Piston diameter of 40 mm (1.57 in)
- Aluminum housing with a rust-preventative finish
- Banjo bolt inlet with an M10 - 1.0 thread
- M7-1.0 bleeder screw with a cap
Quick facts
- Part: Nugeon 99-01766A brake caliper
- Also called: disc brake caliper
- Fits: 2018-2024 Toyota Camry
- Position: Rear right
- Material: Aluminum housing, steel piston
- Condition: Remanufactured
A caliper that sticks or leaks can show up as a pull to one side under braking or fluid around the piston boot. Before you replace the caliper, rule out a collapsed brake hose or worn pads on that wheel, since either can produce similar symptoms.
Fits
This 2018-2024 Toyota Camry caliper is a direct-fit replacement for the rear right wheel. This listing is one side only; the rear left caliper is a separate part, and the two on the rear axle are normally replaced at the same time.
Specifications
Fit and size
- Position: Rear right
- Quantity per application: 1
- Piston diameter: 40 mm (1.57 in)
- Piston quantity: 1
- Inlet fitting: Banjo bolt, M10 - 1.0 thread
- Bleeder screw thread: M7-1.0
Build and materials
- Caliper type: Floating
- Housing material: Aluminum
- Piston material: Steel
- Finish: Rust preventative
- Condition: Remanufactured
- Country of origin: Mexico
In the box
One remanufactured rear right brake caliper with its mounting bracket, caliper slides, dust boots, pad hardware, mounting hardware, bleeder screw with cap and crush washers. Brake pads, bracket mounting bolts, anti-squeal shims and wear sensors are not included, so plan on new mounting bolts. This listing holds one caliper, and the rear right wheel takes one.
Interchange / FMSI:
FMSI: D1212
Frequently Asked Questions
Does the Nugeon 99-01766A work as a Toyota Camry brake caliper replacement for 2018-2024?
Yes. Nugeon 99-01766A is the rear right caliper for the 2018-2024 Toyota Camry; the rear left is a separate part.
What is included with brake caliper 99-01766A, and what is left out?
Nugeon 99-01766A includes the bracket, slides, dust boots, pad hardware, bleeder screw with cap and crush washers. Pads, bracket mounting bolts, anti-squeal shims and wear sensors are not included.
What piston size and banjo bolt thread does this brake caliper use?
This caliper has one steel piston, 40 mm (1.57 in) across, and an M10 - 1.0 banjo bolt inlet. The bleeder screw is M7-1.0.
How can I tell a disc brake caliper may be sticking or leaking?
Signs can include a burning smell after driving, uneven pad wear or a wheel that runs hotter than the others. Brakes are a safety system, so have a shop inspect it promptly.
Is this Nugeon caliper remanufactured, and what finish does it have?
Yes, it is remanufactured. It is a floating caliper with an aluminum housing and a rust-preventative finish.
