Nugeon 99-01852A rear right brake caliper for the 2014-2020 Kia Sorento and other vehicles clamps the brake pads against the rotor to slow the wheel. This remanufactured Nugeon brake caliper is a floating design that comes with its mounting bracket.
- Floating caliper design with a single steel piston
- Aluminum housing with a rust-preventative finish
- Banjo bolt inlet fitting and an M10-1.0 bleeder screw
- Housing cast number BC140123 and bracket cast number BC412205
Quick facts
- Part: Nugeon 99-01852A brake caliper
- Also called: disc brake caliper
- Fits: 2014-2020 Kia Sorento and other vehicles
- Position: Rear right
- Material: Aluminum housing, steel piston
- Condition: Remanufactured
Pulling to one side under braking, a rear wheel that drags, or brake fluid weeping around the piston boot can mean the caliper is worn, though a seized slide or a collapsed brake hose can be behind those signs too. Find the cause before replacing the caliper.
Fits
This rear right brake caliper is a direct-fit replacement for the 2014-2020 Kia Sorento, the 2013-2016 Hyundai Santa Fe and the 2013-2018 Hyundai Santa Fe Sport. This listing is one caliper for the rear right; the rear left is a separate part, and the two calipers on that axle are normally replaced together. The rear right takes one.
Specifications
Fit and size
- Position: rear right
- Quantity per vehicle: 1
- Piston diameter: 43 mm (1.69 in)
- Piston quantity: 1
- Inlet port thread: M10-1.0 x 23.4
- Bleeder screw thread: M10-1.0
Build and materials
- Caliper type: floating
- Housing material: aluminum
- Piston material: steel
- Finish: rust preventative
- Condition: remanufactured
- Country of origin: Mexico
In the box
One remanufactured brake caliper with its mounting bracket, caliper slides, dust boots, caliper and pad hardware, bleeder screw with cap, and a crush washer. Brake pads, wear sensors, anti-squeal shims and bracket mounting bolts are not included, so plan on new bolts, since the old ones may not be reusable.
Interchange / FMSI:
FMSI: D1284
Frequently Asked Questions
Is this the right 2014-2020 Kia Sorento brake caliper?
Yes. Nugeon 99-01852A is the rear right caliper for the 2014-2020 Kia Sorento. If your car is another model, look it up in the "Vehicles it fits" section.
Is this the right 2013-2016 Hyundai Santa Fe brake caliper?
Yes. Nugeon 99-01852A is the rear right caliper for the 2013-2016 Hyundai Santa Fe, and the 2013-2018 Hyundai Santa Fe Sport takes it as well.
Does this disc brake caliper come with the mounting bracket and hardware?
Yes. Nugeon 99-01852A includes the bracket, slides, dust boots, caliper and pad hardware, bleeder screw with cap, and a crush washer. Brake pads, wear sensors, anti-squeal shims and bracket mounting bolts are not included.
Is the Nugeon caliper a floating design, and how big is the piston?
Yes. This caliper is a floating type with one steel piston that is 43 mm (1.69 in) across.
What inlet fitting does this rear right brake caliper use?
The inlet is a banjo bolt fitting with an M10-1.0 x 23.4 port thread, and the bleeder screw is M10-1.0. A crush washer comes with the caliper.
