Nugeon Disc Brake Caliper P/N:99-01137B
Nugeon 99-01866A rear right brake caliper for the 2017-2022 Kia Sportage and other vehicles clamps the pads against the rotor to slow the wheel. This remanufactured disc brake caliper uses a floating design.
A sticking or leaking rear caliper can show up as the car pulling to one side, pads wearing unevenly or fluid around the caliper or its dust boot. Those signs alone do not prove the caliper is at fault, since a collapsed brake hose can pull a car the same way.
It fits the 2017-2022 Kia Sportage and the 2015-2018 Hyundai Tucson, and each takes one on the rear right. The rear left caliper is a separate part that is ordered separately, and the two sides are normally replaced together.
Fit and size
Build and materials
One remanufactured rear right brake caliper with its bracket, caliper slides, pad hardware, dust boots, bleeder screw with cap and crush washer. Brake pads, bracket mounting bolts, anti-squeal shims, wear sensors and grease are not included, so plan on new mounting bolts.
Interchange / FMSI:
FMSI: D1848
Does the Nugeon 99-01866A fit the 2017-2022 Kia Sportage?
Yes. The Nugeon 99-01866A is a rear right brake caliper for the 2017-2022 Kia Sportage. The rear left side is a separate part.
Does this Nugeon caliper come with brake pads or mounting bolts?
No, brake pads and bracket mounting bolts are not included. The caliper does come with its bracket, caliper slides, pad hardware, dust boots and a bleeder screw with cap.
What thread does the bleeder screw on this Nugeon brake caliper use?
The Nugeon 99-01866A bleeder screw is M10-1.0, and the banjo-bolt inlet port is also M10-1.0. The steel piston is 38 mm (1.50 in) across.
How can I tell if a rear right brake caliper is sticking or leaking?
Fluid around the caliper or its dust boot, pads worn unevenly or the car pulling to one side can point to a problem with this rear caliper. Have a shop inspect the brakes promptly.
Can I use this as a Tucson brake caliper on the 2015-2018 Hyundai Tucson?
Yes. The Nugeon 99-01866A rear right caliper fits the 2015-2018 Hyundai Tucson. The rear left caliper is ordered separately.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.