Nugeon Disc Brake Caliper P/N:99-01009A
Nugeon 99-01869B front right brake caliper for the 2017-2022 Kia Sportage and other vehicles clamps the brake pads against the rotor to slow the wheel. A remanufactured unit, it replaces a front right caliper that has started leaking or sticking.
A brake caliper that leaks or sticks can cause the car to pull to one side, a burning smell after a drive, or fluid around the dust boot. Worn pads, a collapsed hose or a damaged rotor can bring on similar symptoms, so find the cause before replacing the caliper. During a brake service, look for wetness at the boot.
This front right brake caliper is a direct-fit replacement for the 2017-2022 Kia Sportage and the 2016-2021 Hyundai Tucson. The 2016-2021 Hyundai Tucson takes one on the front right; this listing is one caliper, the front left is a separate part, and the two front calipers are normally replaced together.
Fit and size
Build and materials
One brake caliper with its mounting bracket, caliper slides, dust boots, bleeder screw with cap, crush washers, and caliper and pad hardware. Brake pads, anti-squeal shims, wear sensors and bracket mounting bolts are not included; plan on new bolts, since the old ones may not be reusable.
Interchange / FMSI:
FMSI: D1847
Does this Nugeon caliper fit the 2017-2022 Kia Sportage?
Yes, Nugeon 99-01869B is the front right brake caliper for the 2017-2022 Kia Sportage and the 2016-2021 Hyundai Tucson; the front left is a separate part.
Does this front right brake caliper come with a bracket and pads?
It includes the mounting bracket, slides, dust boots, bleeder screw with cap and crush washers. Brake pads and bracket mounting bolts are not included.
Is this disc brake caliper a floating or fixed design?
Floating. Nugeon 99-01869B has one 60 mm steel piston and a cast iron housing.
How do I tell if a front right brake caliper is sticking?
Signs can include a soft pedal, brakes that seem to drag, or pads worn unevenly, which shows at a brake service. A shop can test the caliper and its hose properly.
Is this Nugeon brake caliper new or remanufactured?
It is remanufactured. Nugeon 99-01869B has a banjo bolt inlet with an M10 - 1.0 thread and an M10-1.0 bleeder screw.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.