Nugeon Disc Brake Caliper P/N:99-02317A
TERREPOWER 99-02409B front left brake caliper for the 2004-2010 BMW X3 is a remanufactured caliper that squeezes the pads against the rotor. This 2004-2010 BMW X3 caliper, also called a disc brake caliper, sits at the front left wheel.
A car that pulls to one side under braking, pads that wear unevenly, or fluid around the piston boot can mean this caliper is worn, though a damaged brake hose or a worn rotor can also produce them, so look for the cause before you replace it.
It is a direct-fit replacement for the 2004-2010 BMW X3. This listing is one caliper for the front left; the front right is a separate part, and the two are normally replaced together. The 2004-2010 BMW X3 takes one caliper at the front left.
Fit and size
Build and materials
One front left caliper with its bracket, caliper slides, dust boots, bleeder screw and crush washers. Not included: pads, anti-squeal shims, wear sensors, bleeder screw cap, caliper and pad hardware, and mounting bolts for the caliper and bracket; plan on new bolts, since the old ones may not be reusable.
Product information is for general reference and may contain errors. See our Disclaimer.
Is this a front brake caliper for the 2004-2010 BMW X3 on the left side?
Yes. TERREPOWER 99-02409B is the front left caliper for the 2004-2010 BMW X3. The front right side is a separate part.
Does this TERREPOWER caliper come with pads or a bleeder screw?
TERREPOWER 99-02409B includes the bracket, caliper slides, dust boots, bleeder screw and crush washers. Pads, anti-squeal shims, wear sensors, the bleeder screw cap and mounting bolts are not included.
What size piston does the 99-02409B caliper have?
This caliper has one steel piston that measures 57 mm (2.244 in) across, in a floating caliper design.
How can I tell if my front left caliper is sticking or worn?
Pulling to one side, uneven pad wear or fluid around the piston boot can be signs of a worn caliper. A shop can test it to confirm.
What thread does the bleeder screw on this caliper use?
The bleeder screw thread is M8-1.25, and the screw is included. The bleeder screw cap is not.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.