Nugeon 99-17295A rear right brake caliper for the 1993-1997 Chevrolet Camaro and other vehicles clamps the brake pads against the rotor to slow the wheel. This remanufactured floating disc brake caliper has a single aluminum piston.
- Floating caliper with one piston, 40 mm in diameter
- Aluminum piston and aluminum caliper casting
- Rust-preventative finish on the caliper
- Banjo inlet fitting with an M10-1.0 x 27.32 mm port thread
Quick facts
- Part: Nugeon 99-17295A brake caliper
- Also called: disc brake caliper
- Fits: 1993-1997 Chevrolet Camaro and other vehicles
- Position: Rear right
- Material: Aluminum
- Condition: Remanufactured
A sticking or leaking rear caliper can show up as the car pulling to one side, uneven pad wear or brake fluid around the dust boot. A collapsed rear brake hose is one other cause of dragging, so these signs alone do not prove the caliper is the problem.
Fits
This is a direct-fit replacement brake caliper for the 1988 and 1993-1997 Chevrolet Camaro and for the 1993-1997 Pontiac Firebird. This listing is one caliper for the rear right; the rear left is a separate part, and that axle's calipers are normally done at the same time.
Specifications
Fit and size
- Position: Rear right
- Quantity per vehicle: 1 (this side)
- Piston diameter: 40 mm (1.575 in)
- Piston outside diameter: 40.34 mm (1.59 in)
- Inlet fitting: banjo, M10-1.0 x 27.32 mm port thread
- Bleeder screw thread: M10-1.0
Build and materials
- Caliper type: floating, 1 piston
- Piston material: aluminum
- Casting material: aluminum
- Finish: rust preventative
- Condition: remanufactured
- Housing cast number: K241-047C
- Country of origin: Mexico
In the box
One remanufactured brake caliper with its mounting bracket, caliper slides, dust boots, bleeder screw, crush washers and caliper and pad hardware. This listing holds one caliper, and the rear right takes one. Pads, wear sensors, anti-squeal shims, bracket mounting bolts and the bleeder screw cap are not included, so plan on new bracket mounting bolts.
Frequently Asked Questions
Does this rear right brake caliper fit the 1993-1997 Chevrolet Camaro?
Yes. Nugeon 99-17295A fits the rear right of the 1993-1997 Chevrolet Camaro and the 1993-1997 Pontiac Firebird. The rear left takes its own caliper.
What comes with the Nugeon brake caliper?
The caliper includes its bracket, slides, dust boots, bleeder screw, crush washers and pad hardware. Pads, wear sensors, shims, bracket mounting bolts and the bleeder screw cap are not included.
Is the Nugeon caliper a single-piston design?
Yes. Nugeon 99-17295A is a floating caliper with one aluminum piston, 40 mm in diameter, and a banjo inlet with an M10-1.0 x 27.32 mm port thread.
What thread size is the bleeder screw on this rear caliper?
The bleeder screw is M10-1.0, and it is included with the caliper. The bleeder screw cap is not included.
Is the Nugeon 99-17295A caliper new or remanufactured?
It is remanufactured, with a rust-preventative finish. The housing cast number is K241-047C.
