Front Right Brake Caliper for 1998-2002 Chevrolet Camaro & More - Nugeon 99-17315A

$126.99
WARNING:California Proposition 65▾

Vehicles this part fits

    Part number: 99-17315A
    UPC: 736749385442
    Condition: New
    Weight: 9.10 LBS
    Item Package Code: EA
    Part Has Core (Y/N): N
    Item Package Quantity: 1
    $126.99
    Adding to cart… The item has been added

    Have questions?

    Nugeon Disc Brake Caliper P/N:99-17315A
    Nugeon Disc Brake Caliper P/N:99-17315A
    $126.99
    $126.99

    Nugeon 99-17315A front right brake caliper for the 1998-2002 Chevrolet Camaro and other vehicles clamps the brake pads against the rotor to slow the wheel. This remanufactured Nugeon brake caliper, also called a disc brake caliper, replaces a worn or leaking unit on the front right wheel.

    • Floating caliper with two steel pistons
    • Aluminum caliper casting
    • Rust-preventative finish
    • Banjo inlet fitting with an M10-1.0 thread

    Quick facts

    • Part: Nugeon 99-17315A brake caliper
    • Also called: disc brake caliper
    • Fits: 1998-2002 Chevrolet Camaro and other vehicles
    • Position: Front right
    • Material: Aluminum caliper casting, steel pistons
    • Condition: Remanufactured

    A worn or failing caliper can show up as the vehicle pulling to one side when you brake, pads wearing faster on one wheel, or fluid around the piston boot. These signs alone do not prove the caliper is the problem; a collapsed brake hose can also make a brake stick.

    Fits

    This caliper is a direct-fit replacement for the front right wheel of the 1998-2002 Chevrolet Camaro and the 1998-2002 Pontiac Firebird. This listing is one side only. The front left is a separate part, and the other caliper on that axle is normally replaced at the same time.

    Specifications

    Fit and size

    • Position: Front right
    • Quantity per application: 1
    • Piston quantity: 2
    • Piston 1 outside diameter: 44.93 mm (1.77 in)
    • Piston 2 outside diameter: 45 mm (1.772 in)
    • Inlet fitting: Banjo
    • Inlet port thread: M10-1.0 x 27.32 mm
    • Bleeder screw thread: M10-1.0
    • Housing cast numbers: 18023839, 18043189
    • Bracket cast number: 18023851

    Build and materials

    • Caliper type: Floating
    • Casting material: Aluminum
    • Piston material: Steel
    • Finish: Rust preventative
    • Condition: Remanufactured
    • Country of origin: Mexico

    In the box

    One caliper with its mounting bracket, caliper slides, dust boots, bleeder screw, crush washers, and caliper and pad hardware. The front right position takes a single caliper, so this listing covers it. Brake pads, wear sensors, anti-squeal shims, the bleeder screw cap and the bracket mounting bolts are not included. The old mounting bolts may not be reusable, so plan on new ones.

    Frequently Asked Questions

    Is this front right Camaro brake caliper the correct one for the 1998-2002 Chevrolet Camaro?

    Yes. Nugeon 99-17315A is a front right caliper that fits the 1998-2002 Chevrolet Camaro and the 1998-2002 Pontiac Firebird. The left side is a separate part.

    Does the Nugeon caliper come with brake pads?

    No. Pads, wear sensors and anti-squeal shims are not included. This Nugeon 99-17315A does come with its bracket, caliper slides, dust boots, bleeder screw and crush washers.

    What size are the pistons on this brake caliper?

    The caliper has two steel pistons, one 44.93 mm (1.77 in) and one 45 mm (1.772 in) across. The inlet is a banjo fitting with an M10-1.0 thread.

    What are the signs of a sticking brake caliper?

    The vehicle can pull to one side when braking, or the pads can wear faster on one wheel. A leak around the piston boot, seen with the engine off, can also point to a caliper problem.

    Is this caliper new or remanufactured?

    It is remanufactured. This Nugeon 99-17315A is a floating caliper with an aluminum casting and a rust-preventative finish.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review