Rear Right Brake Caliper for 2011-2016 Hyundai Elantra & More - TERREPOWER 99P00860A

$163.99
WARNING:California Proposition 65▾

Vehicles this part fits

    Part number: 99P00860A
    UPC: 736749706599
    Condition: New
    Weight: 12.00 LBS
    Item Package Quantity: 1
    $163.99
    Adding to cart… The item has been added

    Have questions?

    Nugeon Disc Brake Caliper P/N:99P00860A
    Nugeon Disc Brake Caliper P/N:99P00860A
    $163.99
    $163.99

    TERREPOWER 99P00860A rear right brake caliper for the 2011-2016 Hyundai Elantra and other vehicles squeezes the pads against the rotor to slow the wheel. This caliper is remanufactured and sold as a single rear right unit.

    • Aluminum housing with an E-coated finish
    • Floating caliper with one steel piston
    • Banjo inlet fitting with an M10-1.0 x 23.4 port thread
    • Housing cast numbers BC140191 MANDO L and bracket cast number BC412178

    Quick facts

    • Part: TERREPOWER 99P00860A brake caliper
    • Also called: disc brake caliper
    • Fits: 2011-2016 Hyundai Elantra and other vehicles
    • Position: Rear right
    • Material: Aluminum housing, steel piston
    • Condition: Remanufactured

    A failing rear caliper can show up as pulling to one side, a brake that drags, a fluid leak at the caliper or a pad worn unevenly. These signs alone do not prove the caliper is the problem; a worn brake hose can cause them too. Do the rear axle as a pair when you can: this listing is one caliper, and the left side is ordered separately.

    Fits

    For the 2011-2016 model years, it works as a Hyundai Elantra brake caliper replacement, and it also fits the 2013-2014 Hyundai Elantra Coupe. The rear right position takes one caliper on each of them.

    Specifications

    Fit and size

    • Position: Rear right
    • Quantity per vehicle: 1
    • Piston quantity: 1
    • Piston diameter: 34 mm (1.339 in)
    • Piston 1 outside diameter: 33.78 mm (1.33 in)
    • Bleeder screw thread: M10-1.0
    • Inlet thread: M10-1.0, port M10-1.0 x 23.4 mm

    Build and materials

    • Condition: Remanufactured
    • Caliper type: Floating
    • Inlet fitting: Banjo
    • Housing material: Aluminum
    • Piston material: Steel
    • Finish: E-coated
    • Country of origin: Mexico

    In the box

    One remanufactured caliper with its mounting bracket, caliper slides, dust boots, caliper and pad hardware, bleeder screw and crush washer. Pads, wear sensors, anti-squeal shims, the bleeder cap and bracket mounting bolts are not included; plan on new bolts, since the old ones may not be reusable.

    Interchange / FMSI:

    FMSI: D1544

    Frequently Asked Questions

    Is this a Hyundai Elantra brake caliper for 2011-2016 models?

    Yes. TERREPOWER 99P00860A is a rear right caliper for the 2011-2016 Hyundai Elantra; the left rear is a separate part.

    Does this disc brake caliper come with the bracket and pads?

    Yes, the bracket is included, but the pads are not. Slides, dust boots, hardware, bleeder screw and crush washer come too; wear sensors, anti-squeal shims, the bleeder cap and bracket mounting bolts do not.

    What size are the bleeder screw and inlet thread on this rear right caliper?

    On TERREPOWER 99P00860A the bleeder screw is M10-1.0. The banjo inlet port thread is M10-1.0 x 23.4 mm.

    How can I tell if a rear caliper is sticking?

    Pulling to one side, a brake that drags or a fluid leak at the caliper can mean it is failing. A shop can test the piston and slides.

    Is the piston in this remanufactured caliper steel?

    Yes. This rear caliper has one steel piston, 34 mm (1.339 in) in diameter, in a floating design with an aluminum housing and E-coated finish.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review