Rear Right Brake Caliper for 2011-2013 Kia Sorento & More - TERREPOWER 99P00864A
TERREPOWER 99P00864A rear right brake caliper for the 2011-2013 Kia Sorento and other vehicles clamps the brake pads against the rotor to slow the wheel. This is a remanufactured caliper.
- Floating disc brake caliper with one 43 mm piston
- Aluminum caliper casting with an E-coated finish
- Phenolic piston material
- Banjo bolt inlet fitting on an M10-1.0 x 23.4 mm port
Quick facts
- Part: TERREPOWER 99P00864A brake caliper
- Also called: disc brake caliper
- Fits: 2011-2013 Kia Sorento and other vehicles
- Position: Rear right
- Material: Aluminum caliper casting
- Condition: Remanufactured
A car that pulls to one side, uneven pad wear or brake fluid around the caliper can point to a worn caliper. Worn pads, a tired rotor or a damaged brake hose can be behind the same signs, so find the cause before you buy. This listing is one rear right caliper; the rear left is a separate part, and both sides are normally replaced together. The 2011-2013 Kia Sorento takes one caliper at this position.
Fits
It is a 2011-2013 Kia Sorento brake caliper for the rear right wheel, and it also fits the 2010-2012 Hyundai Santa Fe.
Specifications
Fit and size
- Position: Rear right
- Quantity per vehicle: 1
- Piston diameter: 43 mm (1.693 in)
- Piston quantity: 1
- Inlet fitting: Banjo bolt
- Inlet port thread: M10-1.0 x 23.4 mm
- Bleeder screw thread: M10-1.0
Build and materials
- Caliper type: Floating
- Casting material: Aluminum
- Finish: E-coated
- Piston material: Phenolic
- Housing cast number: BC140123
- Condition: Remanufactured
- Country of origin: Mexico
In the box
One brake caliper with its bracket, caliper slides, dust boots, bleeder screw and crush washers. Brake pads, anti-squeal shims, a bleeder screw cap, caliper and pad hardware, wear sensors and the bracket mounting bolts are not included, so plan on new bolts.
Frequently Asked Questions
Is this the rear brake caliper for the 2011-2013 Kia Sorento?
Yes. TERREPOWER 99P00864A is the rear right caliper for the 2011-2013 Kia Sorento. The rear left side is a separate part.
Is this a 2010-2012 Hyundai Santa Fe brake caliper too?
Yes. TERREPOWER 99P00864A also fits the 2010-2012 Hyundai Santa Fe, at the rear right wheel.
Does the TERREPOWER 99P00864A caliper come with brake pads and bracket bolts?
No. It includes the bracket, caliper slides, dust boots, bleeder screw and crush washers, but no pads, anti-squeal shims or bracket mounting bolts.
What piston size and inlet thread does this rear right caliper have?
The phenolic piston is 43 mm (1.693 in) across, and the banjo bolt inlet port thread is M10-1.0 x 23.4 mm. The bleeder screw thread is M10-1.0.
How can I tell if a rear brake caliper is leaking or sticking?
Look for brake fluid around the caliper, pads worn more on one side, or the car pulling to one side while driving. A shop can test the caliper and hydraulic system.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review