Front Left Brake Caliper for 2003-2007 Honda Accord - TERREPOWER 99P00944A
TERREPOWER 99P00944A front left brake caliper for the 2003-2007 Honda Accord clamps the pads against the rotor to slow the wheel. This remanufactured floating caliper, also called a disc brake caliper, replaces the unit on the front left wheel.
- Single steel piston, 57 mm in diameter
- Cast iron casting with an E-coated finish
- Banjo bolt inlet fitting with an M10-1.0 x 23.4 inlet port thread
- Bleeder screw with M10-1.25 thread
Quick facts
- Part: TERREPOWER 99P00944A brake caliper
- Also called: disc brake caliper
- Fits: 2003-2007 Honda Accord
- Position: Front left
- Material: Cast iron (casting), steel (piston)
- Condition: Remanufactured
A front left caliper that sticks or leaks can show up as the car pulling to one side under braking, uneven pad wear or fluid around the dust boot. At your next brake service, with the engine off and the brakes cool, look at the boot and the fitting for wetness or tears, since worn pads or a damaged hose can also make a car pull.
Fits
This front left caliper is a direct-fit replacement for the 2003-2007 Honda Accord. This listing is one caliper; each side takes one, the front right is a separate part, and both sides are normally replaced together.
Specifications
Fit and size
- Position: front left
- Quantity per vehicle: 1
- Piston diameter: 57 mm (2.244 in), 1 piston
- Inlet fitting: banjo bolt, M10-1.0 x 23.4 mm port thread
- Bleeder screw thread: M10-1.25
Build and materials
- Caliper type: floating
- Condition: remanufactured
- Casting material: cast iron
- Piston material: steel
- Finish: E-coated
- Housing cast numbers: 17CL-C, 0173
- Country of origin: Mexico
In the box
One brake caliper with its bracket, caliper slides, dust boots, bleeder screw and crush washers. Brake pads, anti-squeal shims, wear sensors, the bleeder screw cap, bracket mounting bolts and caliper and pad hardware are not included, so plan on new bolts, since the old ones may not be reusable.
Frequently Asked Questions
Is the TERREPOWER 99P00944A caliper the right one for the 2003-2007 Honda Accord?
Yes. TERREPOWER 99P00944A is a front left brake caliper for the 2003-2007 Honda Accord. The front right side takes a separate caliper.
Does the TERREPOWER 99P00944A caliper come with brake pads and mounting bolts?
No. It comes with the bracket, slides, dust boots, bleeder screw and crush washers. Pads, shims, wear sensors and bracket mounting bolts are not included.
What size piston does this front left caliper have?
This caliper has one steel piston, 57 mm (2.244 in) across, in a floating design with a cast iron casting.
What signs can a sticking front left caliper show?
Pulling toward one side when braking, uneven pad wear or fluid near the dust boot can mean a caliper is sticking or leaking. A shop can test it to be sure.
What bleeder screw thread does the 99P00944A use?
TERREPOWER 99P00944A includes the bleeder screw, which has an M10-1.25 thread, but not the bleeder screw cap.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review