TERREPOWER 99P01034B rear left brake caliper for the 2013-2017 Honda Accord clamps the pads against the rotor to slow the wheel. This remanufactured disc brake caliper is a floating design with a single steel piston.
- Floating caliper with one steel piston, 38.1 mm (1.5 in) in diameter
- Cast iron housing with an E-coated finish
- Banjo inlet fitting with an M10 - 1.0 port thread
Quick facts
- Part: TERREPOWER 99P01034B brake caliper
- Also called: disc brake caliper
- Fits: 2013-2017 Honda Accord
- Position: Rear left
- Material: Cast iron
- Condition: Remanufactured
A pull to one side when braking or brake fluid around the caliper can mean a caliper needs replacing. A worn brake hose is another common cause of a pull, so these signs alone do not prove the caliper is at fault. This listing is one caliper for the rear left, and the rear right is a separate part; both sides are normally replaced together. The axle takes one on each side.
Fits
This caliper fits the rear left wheel of the 2013-2017 Honda Accord.
Specifications
Fit and size
- Position: Rear left
- Quantity per application: 1
- Piston diameter: 38.1 mm (1.5 in)
- Inlet port thread: M10-1.0 x 23.4 mm
- Bleeder screw thread: M10-1.25
- Cast numbers: housing 10CLP B A, bracket 250 CM
Build and materials
- Caliper type: Floating
- Caliper casting material: Cast iron
- Piston material: Steel
- Finish: E-coated
- Condition: Remanufactured
- Caliper manufacturer: Nissin
- Country of origin: Mexico
In the box
One remanufactured brake caliper with its mounting bracket, caliper slides, dust boots, caliper and pad hardware, bleeder screw, banjo bolt and crush washers. Brake pads, anti-squeal shims, wear sensors, a bleeder screw cap and mounting bolts are not included; plan on new bracket bolts, since the old ones may not be reusable.
Interchange / FMSI:
FMSI: D1336
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Is this the 2013-2017 Honda Accord rear caliper for the left side?
Yes. TERREPOWER 99P01034B is the rear left brake caliper for the 2013-2017 Honda Accord. The rear right side takes its own caliper.
Does this 2013-2017 Honda Accord caliper come with the bracket?
Yes. It comes with the mounting bracket, caliper slides, dust boots, and caliper and pad hardware. Brake pads and bracket mounting bolts are not included.
What piston size and bleeder screw thread does this caliper have?
TERREPOWER 99P01034B has one steel piston that measures 38.1 mm (1.5 in) across. The bleeder screw is M10-1.25 and is included.
Do I need new bracket bolts for this remanufactured caliper?
Yes, plan on new bracket mounting bolts. They are not included with this caliper, and the old ones may not be reusable.
What does a sticking rear brake caliper feel like?
A rear brake that drags, a wheel that smells hot or pads that wear unevenly can mean the piston or slides are sticking. A shop can confirm it with a proper inspection.
