TERREPOWER 99P01358A rear right brake caliper for the 2019-2022 Subaru Forester and other vehicles clamps the brake pads against the rotor to slow the wheel. This remanufactured unit, also known as a disc brake caliper, pushes its piston against the pad with hydraulic pressure.
- Floating caliper with one 40 mm steel piston
- Cast iron housing with an E-coated finish
- Banjo inlet fitting with M10-1.0 thread
- Bleeder screw with M10-1.0 thread included
Quick facts
- Part: TERREPOWER 99P01358A brake caliper
- Also called: disc brake caliper
- Fits: 2019-2022 Subaru Forester and other vehicles
- Position: Rear right
- Material: Cast iron
- Condition: Remanufactured
A caliper that is sticking may show up as a pull to one side, a dragging brake or fluid leaking near the wheel. A worn rotor, worn pads or a damaged brake hose can be behind these signs too, so find the cause before you buy a caliper.
Fits
It fits the 2019-2022 Subaru Forester and the 2019-2021 Subaru Crosstrek. The rear axle takes one caliper on each side, and this listing is the right one; the left is a separate part, normally replaced at the same time.
Specifications
Fit and size
- Position: Rear right
- Quantity per application: 1
- Piston diameter: 40 mm (1.57 in)
- Piston quantity: 1
- Inlet fitting: banjo, M10-1.0 thread
- Bleeder screw thread: M10-1.0
- Banjo bolt quantity: 1
Build and materials
- Type: floating caliper, remanufactured
- Casting material: cast iron
- Piston material: steel
- Finish: E-coated
- Housing cast number: GJS S103 L
- Bracket cast number: 7063
- Country of origin: Mexico
In the box
One remanufactured brake caliper with its mounting bracket, caliper slides, dust boots, caliper and pad hardware, bleeder screw and crush washer. Brake pads, wear sensors, anti-squeal shims, the bleeder screw cap and mounting bolts are not included. Plan on new mounting bolts, since older ones may not be reusable.
Interchange / FMSI:
FMSI: D1808
Frequently Asked Questions
Is this a brake caliper replacement for the 2019-2022 Subaru Forester?
Yes. TERREPOWER 99P01358A is a rear right caliper and fits the 2019-2022 Subaru Forester at that position.
Will this rear right caliper work as a brake caliper for the 2019-2021 Subaru Crosstrek?
Yes. TERREPOWER 99P01358A fits the 2019-2021 Subaru Crosstrek at the rear right. The left side takes its own caliper.
Do the bracket and hardware come with this remanufactured rear caliper?
Yes. The bracket, slides, dust boots, caliper and pad hardware, bleeder screw and crush washer are included. Pads, wear sensors, anti-squeal shims and mounting bolts are not.
What does a sticking rear brake caliper feel like?
A sticking caliper can leave the wheel dragging, wear a pad unevenly or pull the car to one side. If you are unsure, a shop can test the brakes.
What are the piston size and inlet thread on this floating caliper?
The single steel piston is 40 mm (1.57 in) across. The banjo inlet fitting and the bleeder screw both use M10-1.0 thread.
