TERREPOWER 99P02004B rear left brake caliper for the 2014-2016 Mazda 3 and other vehicles presses the pads against the rotor to slow the wheel. The caliper is remanufactured and sold as a single unit.
- Floating caliper with one steel piston, 38 mm (1.5 in) outside diameter
- Aluminum casting with an E-coated finish
- Banjo inlet fitting with an M10-1.0 x 23.4 port thread
- Bleeder screw with an M10-1.0 thread
Quick facts
- Part: TERREPOWER 99P02004B brake caliper
- Also called: disc brake caliper
- Fits: 2014-2016 Mazda 3 and other vehicles
- Position: Rear left
- Material: Aluminum (casting), steel (piston)
- Condition: Remanufactured
A car that pulls to one side under braking, brake fluid around the wheel or a pad worn more on one side can mean the caliper is worn. A damaged brake hose or a worn rotor can lie behind those signs as well, so find the cause before replacing the caliper.
Fits
It is a caliper replacement for the 2014-2016 Mazda 3 and the 2014-2016 Mazda 3 Sport. The rear axle takes one caliper on each side; this listing is the rear left, and the rear right is a separate part that is normally replaced at the same time.
Specifications
Fit and size
- Position: rear left
- Quantity per application: 1
- Piston outside diameter: 38 mm (1.5 in)
- Piston quantity: 1
- Inlet port thread: M10-1.0 x 23.4 mm
- Bleeder screw thread: M10-1.0
- Banjo bolt quantity: 1
Build and materials
- Caliper type: floating
- Casting material: aluminum
- Piston material: steel
- Finish: E-coated
- Inlet fitting: banjo
- Housing and bracket cast number: 3830
- Condition: remanufactured
- Country of origin: Mexico
In the box
One remanufactured rear left brake caliper with its bracket, caliper slides, dust boots, caliper and pad hardware, bleeder screw and crush washer. Pads, wear sensors, anti-squeal shims, the bleeder screw cap and the bracket mounting bolts are not included; plan on new mounting bolts.
Interchange / FMSI:
FMSI: D1679
Frequently Asked Questions
Is this a rear brake caliper for the 2014-2016 Mazda 3?
Yes. TERREPOWER 99P02004B is the rear left caliper for the 2014-2016 Mazda 3 and the 2014-2016 Mazda 3 Sport; the rear right side is a separate part.
Does the 2014-2016 Mazda 3 Sport take this rear caliper?
Yes. The 2014-2016 Mazda 3 Sport is in the fitment for this rear left caliper, and it takes one caliper on each side of the rear axle.
Does this disc brake caliper come with brake pads?
No. TERREPOWER 99P02004B is the caliper only; brake pads are sold separately. Wear sensors, anti-squeal shims and bracket mounting bolts are not included either.
What thread is the bleeder screw on this caliper?
The bleeder screw is M10-1.0 and is included with the caliper. The bleeder screw cap is not included.
Is this TERREPOWER caliper a floating or fixed type?
It is a floating caliper with a single steel piston 38 mm (1.5 in) across. The caliper is an aluminum casting with an E-coated finish.
