Nugeon Disc Brake Caliper P/N:99P17983B
TERREPOWER 99P02011A rear right brake caliper for the 2017-2018 Mazda 3 and other vehicles clamps the pads onto the rotor to slow the wheel. This remanufactured disc brake caliper replaces a unit that sticks or leaks.
Worn pads, a worn rotor or a damaged brake hose can be behind a pull to one side, a dragging wheel or uneven pad wear too, so find the cause before replacing the caliper. If this caliper is the cause, this unit replaces it.
This is a rear caliper replacement for the 2017-2018 Mazda 3 and the 2017-2018 Mazda 3 Sport, made for the right side. The listing is one caliper, and the left rear is a separate part; both sides are normally replaced together.
Fit and size
Build and materials
One caliper with its bracket, caliper slides, dust boots, bleeder screw, crush washer, and caliper and pad hardware. The rear right position takes one caliper. Brake pads, anti-squeal shims, wear sensors, the bleeder screw cap and the bracket mounting bolts are not included, so plan on new bracket bolts, since the old ones may not be reusable.
Interchange / FMSI:
FMSI: D2042
Product information is for general reference and may contain errors. See our Disclaimer.
Is this a rear caliper for the 2017-2018 Mazda 3 Sport?
Yes. TERREPOWER 99P02011A is the rear right brake caliper for the 2017-2018 Mazda 3 Sport and also for the 2017-2018 Mazda 3.
Is this rear brake caliper for the left or right side of the 2017-2018 Mazda 3?
It is the right rear. This rear caliper takes one per application, and the left rear is a separate caliper.
Does this remanufactured caliper include the bracket, or do I need pads and bolts separately?
The bracket, slides, dust boots, bleeder screw, crush washer and hardware are included. Pads, anti-squeal shims, wear sensors and the bracket mounting bolts are not.
What size is the piston and the inlet thread on the TERREPOWER 99P02011A?
The single steel piston is 36 mm (1.42 in) across. The banjo inlet and the bleeder screw both use M10-1.0 thread.
How can I tell if a rear brake caliper is sticking or leaking?
Brake fluid around the dust boot, a wheel that drags or a pull to one side can be signs of a sticking or leaking caliper. Have it checked promptly, because worn brakes should not be driven on.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.