TERREPOWER 99P17739B front brake caliper for the 2010-2018 Mercedes-Benz Sprinter 3500 and other vehicles clamps the brake pads against the rotor to slow the wheel. This remanufactured disc brake caliper turns brake fluid pressure into clamping force at the wheel.
A sticking or leaking caliper can show up as the vehicle pulling to one side when braking, uneven pad wear or brake fluid around the caliper. Hoses, pads and slides can produce similar signs, so during a brake service, with the engine off, look over the pad wear and the dust boots before settling on the caliper.
The caliper is listed for a wide range of Mercedes-Benz, Freightliner, Dodge and Workhorse models, including the 2007-2018 Freightliner Sprinter 3500 and the 2007-2009 Dodge Sprinter 3500. If your vehicle isn't named here, search your year and model in the "Vehicles it fits" section. Calipers are normally replaced together on an axle; this listing is one caliper, and the 2010-2018 Mercedes-Benz Sprinter 3500 takes one per position.
Fit and size
Build and materials
One caliper with its bracket, caliper slides, dust boots, bleeder screw with cap, crush washers, and caliper and pad hardware. Brake pads, wear sensors, anti-squeal shims and bracket mounting bolts are not included, so plan on new bolts for the bracket.
Interchange / FMSI:
FMSI: D1268
Is the TERREPOWER 99P17739B caliper right for a 2007-2018 Freightliner Sprinter 3500?
Yes. TERREPOWER 99P17739B is listed for the 2007-2018 Freightliner Sprinter 3500. For another vehicle, look up its year and model in the "Vehicles it fits" section.
Does this caliper come with the bracket and brake pads?
It includes the bracket, slides, dust boots, bleeder screw with cap, crush washers and pad hardware. Brake pads, wear sensors, anti-squeal shims and bracket mounting bolts are not included.
What size are the pistons and bleeder thread on this floating caliper?
TERREPOWER 99P17739B has two steel pistons, each 52 mm (2.05 in) across, and an M10-1.0 bleeder screw thread.
How can I tell if a front caliper is sticking or leaking?
Signs can include the vehicle pulling to one side when braking, uneven pad wear or brake fluid around the caliper. A shop can test the brake hydraulics safely.
Is this front caliper remanufactured, and what is the housing made of?
Yes, it is remanufactured. The housing is cast iron with an E-coated finish, and the pistons are steel.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
