Front Right Brake Caliper for 2014-2021 Ram ProMaster 1500 & More - TERREPOWER 99P17784B

$186.99
WARNING:California Proposition 65▾

Vehicles this part fits

    Part number: 99P17784B
    UPC: 736749260299
    Condition: New
    Weight: 23.00 LBS
    Item Package Quantity: 1
    $186.99
    Adding to cart… The item has been added

    Have questions?

    Nugeon Disc Brake Caliper P/N:99P17784B
    Nugeon Disc Brake Caliper P/N:99P17784B
    $186.99
    $186.99

    TERREPOWER 99P17784B front right brake caliper for the 2014-2021 Ram ProMaster 1500 and other vehicles uses hydraulic pressure to clamp the brake pads against the rotor. This remanufactured disc brake caliper is a floating design with two pistons.

    • Floating caliper with two pistons
    • Steel pistons measuring 46 mm (1.811 in) and 52 mm (2.047 in)
    • Cast iron caliper housing
    • E-coated finish on the caliper
    • M10-1.0 thread on the inlet port and the bleeder screw

    Quick facts

    • Part: TERREPOWER 99P17784B brake caliper
    • Also called: disc brake caliper
    • Fits: 2014-2021 Ram ProMaster 1500 and other vehicles
    • Position: Front right
    • Material: Cast iron caliper, steel pistons
    • Condition: Remanufactured

    A sticking caliper can show up as the vehicle pulling to one side, a brake that drags, or fluid weeping around the piston boot. Before you replace the caliper, rule out worn pads, a collapsed brake hose and seized slides, which can show up in much the same way.

    Fits

    It fits the 2014-2021 Ram ProMaster 1500, the 2014-2021 Ram ProMaster 2500 and the 2014-2021 Ram ProMaster 3500. This listing is one caliper for the front right; the front axle takes one on each side, so the front left is a separate part, and the two are normally done at the same time.

    Specifications

    Fit and size

    • Position: front right
    • Quantity per application: 1
    • Caliper type: floating
    • Pistons: 2
    • Piston diameter: 46 mm (1.811 in), 52 mm (2.047 in)
    • Inlet port thread: M10-1.0
    • Bleeder screw thread: M10-1.0
    • Banjo bolt quantity: 1

    Build and materials

    • Condition: remanufactured
    • Caliper housing: cast iron
    • Piston material: steel
    • Finish: e-coated
    • Caliper manufacturer: Brembo
    • Cast numbers: housing 22941500 C068 46-52/32, bracket 22941600
    • Country of origin: Mexico

    In the box

    One caliper with its mounting bracket, slides, dust boots, bleeder screw with cap, caliper and pad hardware, and crush washers. Brake pads, wear sensors, anti-squeal shims and mounting bolts are not included, so plan on new bolts.

    Interchange / FMSI:

    FMSI: D1540

    Frequently Asked Questions

    Is the TERREPOWER 99P17784B caliper right for the 2014-2021 Ram ProMaster 2500?

    Yes. TERREPOWER 99P17784B is a front right caliper and fits the 2014-2021 Ram ProMaster 2500. The front left side takes a separate caliper.

    Does the 99P17784B caliper include the brake pads and mounting bolts?

    No. Brake pads, wear sensors, anti-squeal shims and mounting bolts are not included, so plan on new bolts. The bracket, slides, dust boots, bleeder screw with cap, pad hardware and crush washers are included.

    What piston sizes does this floating front right caliper have?

    This TERREPOWER 99P17784B has two steel pistons, 46 mm (1.811 in) and 52 mm (2.047 in). The inlet port and the bleeder screw are both M10-1.0.

    How can I tell if my front right caliper is dragging or leaking?

    A vehicle that pulls to one side, a brake that drags, or fluid on the inside of the wheel can be signs of a caliper problem. A shop can test it, and the brakes should be checked promptly.

    Is the 99P17784B caliper cast iron, and what finish does it have?

    Yes. This caliper housing is cast iron with an e-coated finish.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review