Rear Right Brake Caliper for 2008-2019 Ford E-450 Super Duty - TERREPOWER 99P17963A

$199.99
WARNING:California Proposition 65▾

Vehicles this part fits

    Part number: 99P17963A
    UPC: 736749705554
    Condition: New
    Weight: 23.00 LBS
    Item Package Quantity: 1
    $199.99
    Adding to cart… The item has been added

    Have questions?

    Nugeon Disc Brake Caliper P/N:99P17963A
    Nugeon Disc Brake Caliper P/N:99P17963A
    $199.99
    $199.99

    TERREPOWER 99P17963A rear right brake caliper for the 2008-2019 Ford E-450 Super Duty clamps the pads against the rotor to slow the wheel. This is a remanufactured caliper, built as a floating design with two pistons.

    • Phenolic pistons, 54 mm (2.13 in) in diameter
    • Cast iron caliper body with an E-coated finish
    • Banjo bolt inlet fitting with a 3/8-24 thread
    • M10-1.0 bleeder screw with a cap

    Quick facts

    • Part: TERREPOWER 99P17963A brake caliper
    • Also called: disc brake caliper
    • Fits: 2008-2019 and 2021-2026 Ford E-450 Super Duty
    • Position: Rear right
    • Material: Cast iron
    • Condition: Remanufactured

    A failing rear caliper can show up as the vehicle pulling to one side, brake fluid around the dust boot or uneven pad wear at that wheel. Before you replace this caliper, rule out worn pads, a damaged brake hose and a seized slide, since each can produce symptoms like these; a shop can check the brake hydraulics.

    Fits

    This caliper fits the 2008-2019 Ford E-450 Super Duty and the 2021-2026 Ford E-450 Super Duty.

    Specifications

    Fit and size

    • Position: rear right
    • Quantity per application: 1
    • Caliper type: floating
    • Piston quantity: 2
    • Piston diameter: 54 mm (2.13 in)
    • Inlet fitting: banjo bolt, 3/8-24 thread
    • Bleeder screw thread: M10-1.0

    Build and materials

    • Casting material: cast iron
    • Piston material: phenolic
    • Finish: E-coated
    • Condition: remanufactured
    • Country of origin: Mexico

    In the box

    One rear right brake caliper with its mounting bracket, caliper and pad hardware, slides, dust boots, bleeder screw with cap and crush washer. The rear right takes one caliper; the rear left is a separate part ordered separately, and the two sides are normally replaced together. Pads, anti-squeal shims, wear sensors and the bracket mounting bolts are not included, so plan on new bolts rather than reusing the old ones.

    Interchange / FMSI:

    FMSI: D1330

    Frequently Asked Questions

    Does the TERREPOWER 99P17963A fit the 2008-2019 Ford E-450 Super Duty?

    Yes. TERREPOWER 99P17963A is the rear right caliper for the 2008-2019 Ford E-450 Super Duty and the 2021-2026 Ford E-450 Super Duty. The rear left side is a separate part.

    Are brake pads included with this rear right caliper?

    No. Pads are not included, nor are anti-squeal shims, wear sensors or the bracket mounting bolts. The bracket, hardware, slides, dust boots, bleeder screw with cap and crush washer are included.

    How big are the pistons in this rear right caliper, and what are they made of?

    The TERREPOWER 99P17963A has two phenolic pistons with a diameter of 54 mm (2.13 in), in a floating caliper design.

    What inlet fitting and thread does this caliper use?

    This caliper has a banjo bolt inlet fitting with a 3/8-24 thread. Its bleeder screw is M10-1.0.

    Is this disc brake caliper new or remanufactured?

    It is remanufactured. TERREPOWER 99P17963A has a cast iron body with an E-coated finish, and its country of origin is Mexico.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review