Remanufactured Front Right Brake Caliper for 2017-2025 Ford F-450 Super Duty & More - TERREPOWER 99P18058A
TERREPOWER 99P18058A front right brake caliper for the 2017-2025 Ford F-450 Super Duty and other vehicles clamps the brake pads against the rotor to slow the wheel. This remanufactured disc brake caliper replaces a worn or failed front right unit.
- Floating caliper design
- Two phenolic pistons
- E-coated finish on a cast iron casting
- Banjo bolt inlet fitting with a 3/8-24 thread
Quick facts
- Part: TERREPOWER 99P18058A brake caliper
- Also called: disc brake caliper
- Fits: 2017-2025 Ford F-450 Super Duty and other vehicles
- Position: Front right
- Material: Cast iron casting, phenolic pistons
- Condition: Remanufactured
A caliper that is sticking can show up as the vehicle pulling to one side, uneven pad wear or brake fluid around the piston boot. A seized slide, a worn rotor or a weak brake hose can be behind the same signs, so find the cause before you buy a caliper. Each front wheel takes one caliper. This listing is one piece for the front right; the front left is a separate part, and both sides are normally replaced together.
Fits
This caliper fits the 2017-2025 Ford F-450 Super Duty and the 2017-2025 Ford F-550 Super Duty.
Specifications
Fit and size
- Position: Front right
- Quantity per application: 1
- Piston outside diameter: 66 mm (2.60 in)
- Piston quantity: 2
- Inlet thread size: 3/8-24
- Bleeder screw size: 3/8-24 x 1
Build and materials
- Caliper type: Floating
- Casting material: Cast iron
- Piston material: Phenolic
- Finish: E-coated
- Inlet fitting: Banjo bolt
- Condition: Remanufactured
- Country of origin: Mexico
In the box
One remanufactured brake caliper with its mounting bracket, caliper and pad hardware, caliper slides, dust boots, bleeder screw with cap and crush washers. Pads, anti-squeal shims, wear sensors, a grease pack and bracket mounting bolts are not included, so plan on new bolts because the old ones may not be reusable.
Interchange / FMSI:
FMSI: D2018
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Does the TERREPOWER 99P18058A caliper fit a 2017-2025 Ford F-450 Super Duty?
Yes. TERREPOWER 99P18058A is a front right caliper that fits the 2017-2025 Ford F-450 Super Duty and the 2017-2025 Ford F-550 Super Duty.
Does the TERREPOWER 99P18058A caliper come with a bracket and bleeder screw?
Yes. The TERREPOWER 99P18058A includes the mounting bracket, caliper slides, dust boots, bleeder screw with cap and crush washers. Pads and bracket mounting bolts are not included.
What size are the pistons in this front right caliper?
This caliper has two phenolic pistons, each 66 mm (2.60 in) in outside diameter.
How can I tell a front right brake caliper is sticking?
Signs can include the vehicle pulling to one side, uneven pad wear on that wheel or brake fluid around the piston boot. A shop can test the caliper; have brake problems checked promptly.
What inlet fitting and thread does this caliper use?
This caliper has a banjo bolt inlet with a 3/8-24 thread. The bleeder screw size is 3/8-24 x 1.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review