Keep the closed-loop fuel injection reading true on your Harley-Davidson tourer with the OTHERMOTIVE 4-Wire Narrow-Band Oxygen Sensor 932-14087. It installs as a direct-fit replacement for 2017-2018 Harley-Davidson models including the FLHR Road King, FLHX Street Glide, and FLTRX Road Glide — see the Buyer's Guide tab for the full list of 14 applications (all listed as engine "All").
Heated 4-wire narrow-band design: a specific-fit sensor built for the listed application and fitment position.
Measures exhaust oxygen: determines the oxygen content of the exhaust gas to monitor the air-fuel ratio for combustion efficiency, feeding the ECU the signal it needs.
Gas-permeable platinum electrodes: the sensing element uses electrodes made of a gas-permeable platinum layer.
Protective coating: helps prevent contamination and erosion of the electrode surfaces by combustion residue and particulates in the exhaust.
Monitoring the oxygen level helps maintain the correct air-fuel mixture for normal fuel economy and lower emissions. A failed sensor may run the engine poorly, raise fuel consumption or emissions, or illuminate the malfunction indicator light (MIL); inspect the sensor, harness, and connector for damage and diagnose the cause before replacing. Uses a 17 mm hex. Country of origin: Mexico.
Interchange: Manufacturer part number 932-14087.
Frequently Asked Questions
What does this oxygen sensor do?
It measures the oxygen content of the exhaust gas to monitor the air-fuel ratio for combustion efficiency, sending that feedback to the ECU to help manage the fuel mixture and emissions.
Which vehicles does the 932-14087 fit?
It's a direct-fit replacement for 2017-2018 Harley-Davidson models such as the FLHR Road King, FLHX Street Glide, and FLTRX Road Glide. Check the Buyer's Guide tab for all 14 listed applications.
Is this a heated, narrow-band sensor?
Yes. It's a heated, narrow-band oxygen sensor with a 4-wire connection built for the listed application and fitment position.
What are signs this sensor may need replacing?
A failing sensor may cause poor running, higher fuel consumption or emissions, or an illuminated MIL. Inspect the sensor, wiring harness, and connector for damage and diagnose the cause before replacing.
What size wrench is needed to install it?
The sensor uses a 17 mm hex. Follow the vehicle service information for the correct removal and installation procedure and torque.
Walker Products 932-14042 Oxygen Sensor 4-W Direct Fit Narrow-BandThe oxygen sensor measures combustion efficiency based off the amount of oxygen in the exhaust gas.Walker Products Engine Management...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
