Rancho Steering Damper P/N:RS5413
Rancho RS5410 front steering stabilizer for the 2000-2005 Ford Excursion and other vehicles reduces wheel shimmy, bump steer and vibration through the steering. This Rancho steering stabilizer is meant for off-road driving, towing and street use.
A steering stabilizer, also called a steering damper, can show wear as wheel shimmy, steering vibration or oil on the body or rod. With the engine off, look at the unit for oil film, a torn boot and cracked bushings before ordering, since shimmy also has other sources, such as tire balance and worn steering parts. A 2000-2005 Ford Excursion takes a single stabilizer, and this listing is one.
The 2000-2005 Ford Excursion and the 1999-2004 Ford F-250 Super Duty are among the vehicles this steering stabilizer fits, and it is also a steering stabilizer for the 1999-2004 Ford F-350 Super Duty and many other vehicles. If your vehicle is not named here, look up its year and model in the "Vehicles it fits" section.
Fit and size
Build and materials
Interchange: SS10309 · F81A3E651DA · 6828SE · 6854SE · 6855SE · 8550023 · SS10329 · SS15489 · SSD127 · SC2961
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the right 2000-2005 Ford Excursion steering stabilizer?
Yes. Rancho RS5410 fits the 2000-2005 Ford Excursion, and the vehicle takes one. You can look up other vehicles in the "Vehicles it fits" section.
Is this a 1999-2004 Ford F-250 Super Duty steering stabilizer?
Yes. Rancho RS5410 fits the 1999-2004 Ford F-250 Super Duty as a front steering stabilizer, and the truck takes one.
What temperatures can this steering stabilizer handle?
This steering stabilizer's twin-tube cellular gas design with all-weather fluid withstands internal temperatures from -40 to 248°F.
How can I tell if this front steering stabilizer is worn out?
Wheel shimmy, steering vibration or oil on the body can mean the stabilizer is worn. A torn boot is another sign you can see with the engine off.
What are the mounting ends and travel length on the Rancho RS5410?
Both ends use a loop (eyelet) bushing, with a sleeve on the lower mount. Travel is 252 mm, compressed length is 366.3 mm and extended length is 618.2 mm.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.