Rear Shock Absorber for 2007-2017 Jeep Wrangler & More - Rancho RS77328

$111.99

Vehicles this part fits

    Part number: RS77328
    UPC: 039703011822
    Condition: New
    Weight: 5.90 LBS
    Item Package Code: EA
    Part Has Core (Y/N): N
    Item Package Quantity: 1
    $111.99
    Adding to cart… The item has been added

    Have questions?

    Rancho Suspension Shock Absorber P/N:RS77328
    Rancho Suspension Shock Absorber P/N:RS77328
    $111.99
    $111.99

    Rancho RS77328 rear shock absorber for the 2007-2017 Jeep Wrangler and other vehicles damps rear suspension movement with a gas-charged monotube body. Tuned for on-road and off-road handling, it suits extreme off-road use and larger wheel and tire packages.

    • Rancho RS7MT monotube series with a large 2-in. body filled with all-weather fluid, rated for internal temperatures of -40 to 248°F
    • Deflective Disc Valving with progressive tuning for on- and off-road handling
    • 14 mm hardened chrome piston rod resists scuffs and corrosion; integrated dirt wiper seal keeps dirt and debris out
    • Full-floating dividing piston and high-pressure nitrogen gas reduce aeration and shock fade
    • Internal rebound bumper and shouldered rubber bushings help reduce noise, vibration and ride harshness
    • Large 46 mm fluon-banded piston for consistent sealing between the piston and monotube

    Quick facts

    • Part: Rancho RS77328 shock absorber
    • Also called: suspension shock absorber
    • Fits: 2007-2017 Jeep Wrangler and other vehicles
    • Position: Rear
    • Material: Steel body
    • Condition: New

    A worn suspension shock absorber can show up as a bouncy or harsh ride, oil on the body or a clunk over bumps. Before you replace one, rule out worn bushings, springs or mounts, which can give similar signs. Rear shock absorbers are normally replaced as a pair; this listing is one shock absorber, and the rear axle takes one on each side.

    Fits

    It fits the 2007-2017 Jeep Wrangler and the 2018 Jeep Wrangler JK.

    Specifications

    Fit and size

    • Position: Rear
    • Quantity per vehicle: 2
    • Compressed length: 396.7 mm (15.62 in)
    • Extended length: 606.3 mm (23.87 in)
    • Travel length: 209.6 mm (8.25 in)
    • Bore size: 46 mm (1.81 in)
    • Piston rod diameter: 14 mm (0.55 in)
    • Body diameter: 50 mm (1.97 in)
    • Upper mount: cross pin, open ended, 3/8 hole ID at both ends, 3.3/16 pin length (hole center to center)
    • Lower mount: loop (eyelet) bushing and sleeve, 1/2 sleeve ID x 1.1/2 sleeve OAL

    Build and materials

    • Type: gas-charged monotube
    • Valving: progressive
    • Body and cylinder: steel, painted black
    • Piston rod: chromed
    • Condition: New
    • Warranty: Rancho Limited Lifetime Warranty
    • Country of origin: Poland

    In the box

    One rear shock absorber. A boot and springs are not included.

    Installation notes

    • Application-specific mounting is designed to fit right out of the box.
    • No extra hardware is needed for installation.

    Product information is for general reference and may contain errors. See our Disclaimer.

    Frequently Asked Questions

    Are these shock absorbers for the 2007-2017 Jeep Wrangler also right for the 2018 Jeep Wrangler JK?

    Yes. The Rancho RS77328 fits both the 2007-2017 Jeep Wrangler and the 2018 Jeep Wrangler JK as a rear shock absorber.

    Does this Rancho absorber come with a dust boot?

    No. The Rancho RS77328 is the shock only, and a boot is not included. For extra protection, shock boot RS1952 or RS1961 can be purchased separately.

    Are Rancho shock absorbers like this RS7MT gas charged?

    Yes. The RS77328 is gas charged, with a full-floating dividing piston and high-pressure nitrogen gas that holds constant pressure against the hydraulic oil to reduce aeration and shock fade.

    What piston rod and bore size does this rear shock have?

    The piston rod is 14 mm in diameter and the bore is 46 mm. Length is 396.7 mm compressed and 606.3 mm extended, with 209.6 mm of travel.

    Do I need sleeves or extra hardware to install the Rancho RS77328?

    No. Its application-specific mounting is designed to fit right out of the box, with no need for installing sleeves or extra hardware.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review