Front Shock Absorber for 2005-2025 Ford F-250 Super Duty & More - Rancho RS994043

$165.99

Vehicles this part fits

    Part number: RS994043
    UPC: 039703016247
    Condition: New
    Weight: 7.80 LBS
    Item Package Quantity: 1
    $165.99
    Adding to cart… The item has been added

    Have questions?

    Rancho Suspension Shock Absorber P/N:RS994043
    Rancho Suspension Shock Absorber P/N:RS994043
    $165.99
    $165.99

    Rancho RS994043 front shock absorber for the 2005-2025 Ford F-250 Super Duty and other vehicles damps suspension movement and has a nine-position knob to adjust firmness. The RS9000XL is intended for stock or lifted trucks, SUVs and Jeeps that tow, haul or go off road.

    • Fourth-generation RS9000XL design with integrated bottom mounts and a dual component 2K paint finish for chip resistance
    • Nine-position knob for manual damping and firmness control, on-road and off-road
    • Nitrogen gas pressurized to 45 or 60 PSI to reduce damping fade and foaming
    • Tri-tube body filled with all-weather fluid for internal temperatures of -40 to 248°F
    • Polyurethane rebound bumper and bushings with a graphite-filled fluon-banded piston to absorb ride harshness
    • Low-friction, self-lubricating seal that retains gas and oil for quicker rebound and smoother compression

    Quick facts

    • Part: Rancho RS994043 shock absorber
    • Also called: suspension shock absorber
    • Fits: 2005-2025 Ford F-250 Super Duty and other vehicles
    • Position: Front
    • Material: Steel
    • Condition: New

    A worn front suspension shock absorber can show up as a bouncy ride, fluid on the body or uneven tire wear. These signs alone do not prove the shock is the problem; a worn tire or tired spring can ride the same way. This listing is one shock, and both front sides are normally replaced together, one on each side of the axle.

    Fits

    This front shock absorber fits the 2005-2025 Ford F-250 Super Duty and the 2005-2025 Ford F-350 Super Duty.

    Specifications

    Fit and size

    • Position: Front
    • Quantity per vehicle: 2
    • Compressed length: 15.21 in (386.3 mm)
    • Extended length: 23.12 in (587.3 mm)
    • Travel length: 7.91 in (201 mm)
    • Bore size: 32 mm (1.26 in)
    • Rod diameter: 18 mm (0.71 in)
    • Cylinder outside diameter: 2.37 in (60.3 mm)
    • Dust shield diameter: 2.99 in (75.9 mm)
    • Upper mount: Stem mount, 2 5/8 stem length x 1/2-13 thread pitch
    • Lower mount: Loop (eyelet) bushing and sleeve mount, 9/16 sleeve ID x 1.5/8 sleeve OAL

    Build and materials

    • Type: Telescopic, gas charged
    • Damping adjustment: Manual
    • Valving: Progressive
    • Material: Steel body and cylinder
    • Finish: Silver paint
    • Protective boot: Included
    • Condition: New
    • Warranty: Rancho Limited Lifetime Warranty
    • Country of origin: Australia

    In the box

    One shock absorber with its polyvinyl protective boot. Coil springs, spring seats and bearing plates are not included.

    Interchange: RS999043

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    RS999043

    Frequently Asked Questions

    Will this Rancho RS994043 shock absorber fit a 2005-2025 Ford F-250 Super Duty?

    Yes. Rancho RS994043 is a front shock absorber that fits the 2005-2025 Ford F-250 Super Duty.

    How many damping settings does the Rancho RS9000XL front shock absorber have?

    Nine. The nine-position knob sets damping and firmness by hand for on-road and off-road use on the Rancho RS994043.

    What gas pressure does this Rancho absorber hold?

    This shock absorber is nitrogen gas pressurized to 45 or 60 PSI, which helps minimize air-to-oil mixture and reduce damping fade and foaming.

    Does the Rancho RS9000XL shock absorber come with a boot or springs?

    Yes, a polyvinyl protective boot is included. Coil springs, spring seats and bearing plates are not included.

    What mounting ends does this front shock absorber have?

    This shock absorber has an upper stem mount (2 5/8 stem length x 1/2-13 thread pitch) and a lower loop (eyelet) bushing and sleeve mount (9/16 sleeve ID x 1.5/8 sleeve OAL).

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review