Shock Absorber for 2011-2026 Ram 2500 & More - Rancho RS994044

$165.99

Vehicles this part fits

    Part number: RS994044
    UPC: 039703016254
    Condition: New
    Weight: 8.10 LBS
    Item Package Quantity: 1
    $165.99
    Adding to cart… The item has been added

    Have questions?

    Rancho Suspension Shock Absorber P/N:RS994044
    Rancho Suspension Shock Absorber P/N:RS994044
    $165.99
    $165.99

    Rancho RS994044 shock absorber for the 2011-2026 Ram 2500 and other vehicles controls wheel movement with a nine-position knob that sets damping and firmness. This suspension shock absorber is the fourth generation of the RS9000XL, made for both on-road and off-road driving.

    • RS9000XL series with a nine-position knob for adjusting damping and firmness
    • Nitrogen gas charge at 45 or 60 PSI to reduce damping fade and foaming
    • Tri-tube body filled with all-weather fluid for internal temperatures of -40 to 248°F
    • Polyurethane rebound bumper and bushings with a graphite-filled fluon-banded piston to absorb ride harshness
    • Low-friction, self-lubricating seal that retains gas and oil, plus a polyvinyl protective boot
    • Integrated bottom mounts and a dual component 2K paint finish for chip resistance

    Quick facts

    • Part: Rancho RS994044 shock absorber
    • Also called: suspension shock absorber
    • Fits: 2011-2026 Ram 2500 and other vehicles
    • Position: Front, rear
    • Condition: New

    Worn shock absorbers can show up as oil on the body, a bouncy ride or nose dive under braking. Worn control arm bushings, sway bar links or tires can be behind a bouncy ride too, so pin down the source before you buy.

    Fits

    The 2011-2026 Ram 2500, the 1994-2010 Dodge Ram 2500 and the 2005-2025 Ford F-250 Super Duty are among the vehicles this shock absorber fits, along with many others, in both front and rear positions. The 2011-2026 Ram 2500 takes two. This listing is one shock absorber; the other one on the same axle is normally replaced at the same time. If your truck is not named here, look it up in the "Vehicles it fits" section.

    Specifications

    Fit and size

    • Position: front, rear
    • Quantity per vehicle: 2
    • Compressed length: 15.95 in
    • Extended length: 24.6 in
    • Outside diameter: up to 2.38 in, application specific

    Build and materials

    • Series: RS9000XL
    • Construction: tri-tube, adjustable
    • Valving type: progressive
    • Condition: New
    • Country of origin: Australia
    • Warranty: Rancho Limited Lifetime Warranty

    In the box

    One shock absorber. Coil-over springs, springs, spring seats, spring isolators, strut mount insulators and a bearing plate are not included.

    Interchange: 68233904AC · 68233904AD · 68233909AC · 68233910AB · 68233913AB · 68233915AB · 68233917AA · 68233917AC · 68233919AA · 68233922AA · 68233924AA · 68233927AB · 68233929AA · 68233932AA · 68233934AA · 68245513AB · 68245528AA · 68245529AA · 68245530AA · RS999044

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    68233904AC, 68233904AD, 68233909AC, 68233910AB, 68233913AB, 68233915AB, 68233917AA, 68233917AC, 68233919AA, 68233922AA, 68233924AA, 68233927AB, 68233929AA, 68233932AA, 68233934AA, 68245513AB, 68245528AA, 68245529AA, 68245530AA, RS999044

    Frequently Asked Questions

    Does this Rancho RS994044 shock absorber fit the 2005-2025 Ford F-250 Super Duty?

    Yes. Rancho RS994044 is listed for the 2005-2025 Ford F-250 Super Duty, in both front and rear positions.

    How many damping settings does this Rancho absorber have?

    Rancho RS994044 has a nine-position knob, so damping and firmness can be set for on-road or off-road driving.

    Does this shock absorber come with coil-over springs or a bearing plate?

    No. The listing is one shock absorber; coil-over springs, spring seats, spring isolators and a bearing plate are not included.

    What gas pressure does the RS9000XL shock absorber use?

    It is nitrogen gas pressurized to 45 or 60 PSI, which minimizes air-to-oil mixture and reduces damping fade and foaming.

    Is there a warranty on this Rancho tri-tube shock absorber?

    Yes. Rancho backs it with its Limited Lifetime Warranty.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review